What Does Gable End Mean In Construction? A gable end is the triangular section of wall at the end of a pitched roof, extending from the eaves to the peak. It is an important architectural feature and can be distinguished from the rest of the structure by specialized siding, window treatment, or other decorative elements. […]
What Does Flashing Mean In Construction? lashing in construction is a thin material used to prevent water penetration by providing a seal at joints exposed to the weather. It is typically used at roof ridges or valleys, around chimneys, at masonry parapets, gravel stops, and at the head of openings or water tables. Flashing can […]
What Does Erosion Control Logs Mean In Construction? Erosion control logs are materials designed and installed to control sediment at construction sites, thus preventing sediments from moving into waterbodies or waterways. These logs are usually filled with a natural material and wrapped in a synthetic netting. They are typically round tubes of varying lengths that […]
What Is An Emergency Exit? An emergency exit is an exit that is used to provide a safe means of escape from a structure or area in the event of an emergency, such as a fire. Emergency exits must open into locations that are either immediately safe or that provide access to a safe area. […]
What Does Downspout Mean In Construction? A downspout is a pipe attached to the side of a building, through which rainwater flows from the roof into a drain. It is typically vertical and extends down to the ground, where it may be connected to piping that carries the water away from the foundation of the […]
What Is Dentil Molding And Dental Work In Architecture? Dentil molding is a type of architectural ornamentation consisting of small, tooth-shaped blocks used as a repeating pattern in the bedmould of a cornice. It has been used for thousands of years on high-end structures as a purely visual feature. Dentils are usually rectangular in shape […]
What Does Defrosting And Defrost Cycle Mean In Construction? The term “defrosting” in construction refers to the process of melting any ice that has accumulated on the cooling coils of refrigerant equipment. This is usually done through a defrost cycle, which is an automated process that turns off the refrigeration cycle and allows any ice […]
What Does Dewatering Mean In Construction? Dewatering is the process of removing surface or groundwater from a particular location. It is commonly used in construction sites to removing groundwater or surface water for the duration of construction. Construction dewatering is a necessary process for all kinds of construction applications. The dewatering process in construction sites […]
What Do Mortise And Tenon Mean In Construction? A mortise and tenon joint is a very old construction technique that can be traced back thousands of years. It is considered one of the strongest joints next to the dovetail joint. The mortise is the hole that is cut into a board and the tenon or […]
What Does Runoff Mean In Construction? Runoff in construction refers to the precipitation that falls on a site and is not absorbed into the soil, but instead carries away pollutants like sediment, oils, and other debris. Runoff can occur during or after construction due to lack of proper drainage systems such as catch basin, over-saturated […]