Can Epoxy Primer Be Used As A Sealer?
Can Epoxy Primer Be Used As A Sealer?
Yes, epoxy primer can be used as a sealer. Use it as a Final Sealer – For the past three years, we’ve been utilizing our epoxy primer as a final sealer before our base coat.
Cut it in half and apply a layer to seal up your work and provide a good surface to place your base coat on top of. This is especially useful for materials that absorb sealers easily, such as wood.
Epoxy’s thicker consistency works wonders to provide a smooth finish on the wood, while it’s better able to withstand heat means that you don’t need as many coats of the base coat compared with a normal sealer.
Epoxy primer also works well as a Final Sealer on Metals. Suppose the material you’re applying epoxy primer onto happens to be metal and needs protection from rust. In that case, this is an excellent choice for giving the surface a nice protective layer.
Because it’ll provide extra toughness against chipping and cracking, epoxy primer makes an effective final sealer on metals. However, you should take care when applying the sealer to ensure that any rough or sharp edges are covered, as this can cause problems with rust if the metal is exposed.
This can also work on Brick and Concrete – As epoxy primer is a lot more flexible than other materials, it’ll work well on surfaces that aren’t as rigid.
You can use it as a sealer for brick and concrete if you want to protect them from weathering or water damage caused by any damage to the surface. Epoxy’s flexibility makes it a great choice for floors, too! It won’t crack under pressure, so this means less maintenance for you down the line.
Additionally, it would work best on wood, particularly exterior wood like decks, but also interior wood like cabinets or furniture. It’s not a good idea to use it on metal because it can flake off too easily and chip away the finish of your surface.
However, if you want to try it out and see all the hype about how they make them sound waterproof, you could always order some to try it out and then decide if you want to stick with it.
What Is Clear Penetrating Epoxy Sealer?
Clear Penetrating Epoxy Sealer is a thin epoxy that penetrates deeply into the wood’s surface. It is the perfect wood primer for making paint or varnish sticks. CPES reinforces decaying timber and waterproofs all wood to preserve it.
However, CPES doesn’t just preserve the wood; it’s also the best wood-coating sealer if you’re concerned about keeping your docks or boats in top condition. It is easy to use, with no mixing required, and dries clear within a short time.
In addition, Clear Penetrating Epoxy Sealer is an epoxy product that comes in two tins, Part A and Part B. However, mix the Cool formula in a 1:1 ratio. Both these tins are mixed at room temperature and are non-hazardous.
Clear Penetrating Epoxy Sealer is generally used as a prime coat followed by a stain or paint. It will have the same effect as spraying on a single coat of paint but does not have any ‘painty’ look.
CPES can also be used as an undercoat for existing paints and varnishes; it does not affect their adhesion characteristics. Consequently, CPES will adhere easily like the original coat once your existing coats are applied.
Does Epoxy Need Sealer?
Yes, epoxy needs a sealer. Because epoxy is hard, a sealer is needed to give it flexibility and resistance to weathering or chemicals. If you want to increase the longevity of your coating, you can use a sealer as well.
The reason why epoxy needs a sealer is that it’s so hard. When used on a surface, it’ll create an extremely smooth, durable finish that’s waterproof and very difficult to damage.
However, if the surface isn’t naturally water-resistant, such as wood or concrete, your repair will be susceptible to moisture damage. A sealer will help protect against any weathering or chemicals that might compromise your work.
Epoxy primer needs a sealer, or it will not provide any protection against water. Water and wood are the two enemies of wood. Therefore, you need to seal the epoxy primer and ensure that the surface is completely dry before applying your base coat.
However, suppose you want to try out the waterproofing properties of epoxy before committing to a long-term project. In that case, you could use a sealer as a final sealer to create a hard surface for your epoxy primer.
Water and epoxy don’t mix. Applying an epoxy sealer with water will likely be too wet and stick to your surface instead of sealing properly. This can create uneven painting because the coating won’t dry and stick properly or cause your sealer to never fully dry.
