Can You Epoxy The Glass Tabletop?
Can You Epoxy The Glass Tabletop?
Yes, you can use epoxy to create a glossy shine on top of the glass. There are two ways to do this. First, you can use our glass tabletop epoxy, specifically designed for use on glass surfaces. Alternatively, you could mix and apply the resin for a more natural look.
However, keep in mind that if you are planning on using a shop vac to clean the table after it has been covered, this process may be less effective. Next, we will review the process for covering a glass tabletop with epoxy resin.
First, you will need to clean the glass surface with a tack cloth and make sure that it is free from dust and debris. Then, prepare your epoxy resin according to the manufacturer’s directions.
Next, apply a thick layer of mixed epoxy over the glass surface and leave it to dry for 24 hours in an area that can be well-ventilated.
You can also apply two layers of mixed epoxy to maximize coverage and ensure no bubbles or gaps. After 24 hours, you can remove the excess epoxy using a shop vac or vacuum cleaner.
How Do You Tint Epoxy Tabletop?
There are a variety of ways that you can add color to your epoxy resin. Alcohol ink, mic powder, food coloring, acrylic paint, resin dye, and even eyeshadow can all be used to achieve the desired effect.
To tint epoxy, you will need to first, you will need to mix up your epoxy using the appropriate hardener and other additives, such as a catalyst.
Then, add the colorant you want to use. You can use alcohol-based ink, mic powder, or food colorings such as felt tip markers or gel coloring. If you are adding in an alcohol-based ink, make sure that it is designed for use with resin and has no additives that could crack or warp the resin.
Once mixed, you can then add in your desired pigment or colorant. The amount of pigment you add will determine the final color of the epoxy. To achieve consistent color, it is important to mix the epoxy thoroughly.
Once the epoxy is the desired color, you can then begin to pour it onto your tabletop. For best results, pour the epoxy onto the center of the tabletop and then spread it out evenly. Allow the epoxy to cure completely before using the tabletop.
Next, we will provide instructions on how to tint your epoxy resin. Also, ensure that the ink is completely dry before pouring it onto your tabletop since alcohol evaporates quickly. Also, make sure that the ink is completely dry before applying it on your tabletop.
Next, pour the epoxy onto the area you want to color or tint and let it cure for 3 days in an area that can be well-ventilated. After 3 days, you can use a shop vac to remove any excess epoxy.
