Can you put polyaspartic over metallic epoxy?

Yes, polyaspartic coatings outperform epoxy coatings in inter-coat adhesion. Polyaspartic coatings can be applied over metallic epoxy coatings without any issues.

An installer can apply a new polyaspartic top-coat over existing epoxy floor coatings that are still well adherent to the substrate.

How do you make metallic epoxy resin?

There are two ways to make this kind of resin, one is using blue painters’ tape and the other is using a epoxy resin and adding metal fibers to it.

Metallic epoxy resins are a type of resin that can be used in various projects such as jewelry making, hobby kits and other decorative items.

Metallic epoxy resins are usually made out of gemstone or glass beads that are dipped in a mixture of two-part epoxy resin. The mixture will harden into an opaque white color after it has been set. There are different metallic resins available on the market including clear, translucent and opaque types.

Is metallic epoxy heat resistant?

Many epoxy paints and coatings are formulated with special resins to resist heat up to 200 °F, but the substrate must be able to handle this temperature.

For example, un-supported steel will burn at roughly 800 °F and any other coating would need to provide protection in between.

In addition, the paint/coating will fail if the substrate reaches its temperature rating by annealing, or if it fails from prolonged exposure above a threshold temperature.

Can you do metallic epoxy outside?

There are two very different answers to this question, depending on whether one is doing it for decorative or functional purposes.

One can use metallic epoxy paint outside (and in the sun) if it is not polished, it will eventually be bronze.

If one wants a long-lasting finish that retains as much of the metallic appearance as possible, then it should be applied over a high-quality base coat such as House of Kolor automotive basecoat lacquer.

Can you put metallic epoxy over tile?

Yes, if you use a metallic epoxy with metal flakes in it. If the product does not contain metal flakes, then no. You can purchase an epoxy with metal flakes because the color will be permanent and will not fade over time.

How do you prepare a metallic epoxy floor?

Step 1: Separately combine Parts A and B.

Before installing metallic epoxy flooring, you must prepare the part A mixture for 24 hours. That means you should combine the metallic powder and part A sealer the day before you begin coating. This allows the paint to blend in well and keeps the chunks at bay.

Step 2: Applying the Mixture

Assuming the surface has already been prepared and ground for metallic epoxy flooring, it’s time to smear the primer coat. But first, you must join parts A and B. The accepted ration for this solution is 2:1. So, for a 1-part B solution, use 2 parts of A solution (the one you made the day before).

Step Three: Sanding, Vacuuming, and Alcohol Washing

Step 4: Add the Accented Layer

When applying the second layer, use a brush to sprinkle some random lines of the accent colors on the foundation. Because we utilized black metallic powder for the premier coat, the accent color can be a mixture of light silver metallic tone.

How much Metallic do you add to epoxy?

1g of pigment per 1-5oz of epoxy, depending on how saturated you want the color to be. Do not use more than 6% metallic epoxy colorant in the overall volume of resin, since this will disrupt the delicate chemical balance required for the reaction to function properly.

How much does it cost for metallic epoxy flooring?

Epoxy is also available in metallic colors and custom color combinations. The cost of equipment and materials ranges between $2 and $5 per square foot, while labor costs between $1 and $7 per square foot.

The cost of epoxy flooring, including installation, ranges between $3 and $12 per square foot.

How much metallic pigment per gallon is epoxy?

7 Grams per Gallon.

Is metallic epoxy expensive?

Metallic epoxy floors are quite expensive because the materials are more expensive and the process must necessitate more coats as well as a few techniques that are distinct from plain epoxy floors.

How do you apply metallic epoxy to concrete?

This process is identical to that of making a metallic epoxy floor. The only difference is in step two, where you mix your base colors.

Step 1: Mix up your metallic powder/resin (1 gal. of the resin + 2G of the metallic powder). You’ll also need to add a colorant to achieve different color palettes. If using pigment, add it directly to the liquid epoxy as it mixes in a separate container.
Step 2: Add water to your mix to create the consistency you want. At this point, you can mix in your base colors if desired. If so, mix them in at this time as well.
Step 3: Apply the epoxy in thin lines from a stencil or using a squeegee. Use 1/4″-1/8″ lines spaced about 1-2″ apart. Allow the epoxy to set for 15 minutes. Use either a wet/dry sandpaper or steel wool to gently remove the epoxy from the floor. Leave behind a pattern that resembles glass tile.

How do you install epoxy metallic floors?

Metallic epoxy floor installation entails a number of phases and often takes 1-7 days, depending on the size of your job.

Decorative floor designs, such as a metallic finish, are done by hand and need more time to complete. A flooring professional should first properly prepare the concrete surface, which entails a series of processes.

They inspect it for past applications, sand the surface with tools like as a CPS machine and 25 grit metal diamonds, fill all joints and cracks, and thoroughly clean it.

These methods ensure that coatings stick to the concrete surface well, that they are applied evenly, and that they operate well for a long time.

During the application procedure, your flooring professional will first apply the base coat, which is typically a dark, solid color that exaggerates the metallic impression.

Following the completion of the base coat, the metallic epoxy is hand-crafted in accordance with the design criteria.

The final texture and manner of application become an art form, and an expert, creative metallic epoxy installer will generate a long-lasting quality outcome.

The epoxy will set for at least 24 hours. When epoxy flooring cures, it forms polymer structures that give it incredible strength and resistance to spills and abrasion.

As a result, the floor is seamless, extraordinarily hygienic, easy to clean, and odorless, as well as extremely wear-resistant while satisfying the strictest safety standards.

How do you mix metallic pigment into epoxy?

Metallic Epoxy has a two-to-one ratio. That is, two parts A (resin) to one component B. (hardener). Using a drill and a mixing paddle, combine the following. To prevent air entrapment, use a drill mixer at a low speed (no more than 300 rpm).

How do I make my own metallic epoxy floor?

Step 1: Make a color blend scale by mixing your base colors.
Step 2: Add various amounts of water to the base colors until you have three different thicknesses of metallic liquid.
Step 3: Mix each color separately until well blended.

You can use a few different methods to create different textures and effects. The method described yields a floor that resembles glass tile, but you can also do sandblasting or even stamping for other looks.

Use a brush to apply the metallic epoxy to the concrete surface in thin lines (1/4″-1/8″) from one corner of the room to another, without overlapping the lines. The lines should be about 1-2″ apart. Vary the spacing so it doesn’t look too regular.
Allow it to dry for about 15 min and use a stiff bristle brush to “scrub” the epoxy lines as they dry. This will create a textured pattern. Do this in sections until the whole floor is covered.
Use a wet/dry sandpaper or steel wool to lightly sand the floor once it is completely hardened, helping remove some of the excess metallic epoxy.
Use a cleaner/wax or clear sealer to protect the metallic epoxy floor.

You can use this same basic process for dying the concrete itself by mixing water with your epoxy resin and adding in a pigment colorant.

It is possible to achieve both texture as well as color variation, but you’ll have better results if you create two separate processes for each of these features. The step above should be followed for texture.

How do you Metallic epoxy a basement floor?

The process is very similar to the process of making a metallic epoxy floor, with a few important exceptions:

The first step is to mix up your base colors, as described above for mixing the metallic powder/resin mix.

Mixing up your base colors requires more than just mixing up the metallic powder and resin components. You must also add a colorant to achieve different color palettes. Colorants can be added directly to the liquid epoxy as it mixes in a separate container.

The second step is to create the color blends you want to use. This can be done by adding the various base colors to a container and mixing them together. You will also have to add water at this point in order to create your desired consistency.
The third step is similar, where you apply the epoxy in thin, random lines on the floor through a stencil or with a squeegee. You’ll want your lines between 1/4″-1/8″ thick, but they do not need to be uniform. If your lines are too uniform, the floor may lose its texture.
The last step is to use either a wet/dry sandpaper or steel wool to gently remove the epoxy, leaving behind a pattern that resembles glass tile. Be careful not to remove too much of the metallic epoxy as it could be mixed into the base color and ruin your effect.

0 Shares

Can you put polyaspartic over metallic epoxy?