Does Rain Affect Concrete Curing? | Concrete Curing Process.

Does Rain Affect Concrete Curing? | Concrete Curing Process.

Concrete Curing Process

For the hardening of concrete through the setting of constituent components and to promote the reactions in the concrete, curing is carried out. Curing is needed for three main reasons, i.e., for the dissipation of heat, reducing the moisture loss due to evaporation, and maintaining moisture for hydration. Curing helps concrete is gaining strength.

Curing is mostly dependent on moisture because retaining moisture content enhances the hydration process (the chemical reaction between water molecules and cement).  Concrete will gain strength for as long as hydration takes place, and therefore for the initial curing period, maintaining the presence of moisture is important.

Despite this, however, a lot of water can lead to weak concrete slap. It has to have a balance and always consult a professional.

Does Rain Affect Concrete Curing?

Heavy rain can cause serious problems to the freshly poured concrete mix because it can wash out some of the mix’s cement. This will weaken the concrete surface, making it softer and inconsistent and decreasing the strength of the concrete.

When it rains on fresh concrete (about 2-4 hours after mixing), the surface should be protected from the rainfall. The rainwater may not cause damage to the floor that has finishing done as long as it is not worked into the surface and the slab is left untouched.

How Long Does Concrete Take to Dry Before Rain?

Simply because it starts raining during or soon after pouring the concrete does not necessarily mean that your concrete floor is doomed. It all has to do with the timing of the process and at what stage is the curing process on the concrete.

It is good to note that if the rain starts immediately after pouring the concrete, the potential damage may not be that serious. When the finishing process is typically 4 to 8 hours after mixing, the concrete has stiffened, and rainwater may cause little if any damage.

Besides, once the concrete mix settles, water on the surface is actually advantageous because it helps in curing and concrete hydration. Do a simple scratch test using a screwdriver or other concrete surface hardness scratch test kit to assess the surface’s integrity and determine if the rain had any impact.

Factors That Affect the Curing Process:

• Moisture

It is the cement’s interaction with water that causes the curing process. If there is less water, the concrete will cure more quickly. This is because there are fewer bonds to make, meaning the concrete strength may not be as strong as required or expect to be. If there is too much water, it will take longer to cure, and it may lead to flaking on the top layer of concrete.

• Temperature:

In a hotter environment, moisture in the concrete evaporates faster; therefore, your concrete will cure faster. Concrete can be covered with a specially designed concrete blanket to make it hotter so that it will cure faster. This can be especially useful when trying to cure concrete in cold weather conditions.

Again, freezing temperatures will also interfere with the curing process. If you pour concrete in the winter, then you should plan ahead so that the temperature is not allowed to reach the freezing point in the first 24-48 hours.

• Concrete Mix Design:

When you need your concrete to cure faster, you can add an agent or an accelerant to the mix; however, while this speeds-up the setting time, your full-strength concrete may not be quite as strong as concrete allowed to cure to full strength normally.

How Long Should Concrete Cure Before Putting Weight on It

While the above factors can add or subtract a few hours from curing and drying time generally:

• Newly poured concrete can handle foot traffic in about 24 hours
• Newly poured concrete can handle vehicle traffic in 48 hours
• You can treat your concrete as “fully hardened” with any expected max weights approximately 30 days after the pour

How long does it take for concrete to cure?

Main Tips for Pouring Concrete in The Rain

• Always plan ahead and ensure to check the weather forecast on the day of your concrete pouring.
•  If rain is forecast, ensure you have waterproof materials or plastic sheeting available to cover the poured concrete floor.
• Understand your site and check that the surfaces you are pouring onto are dry before you start. Never pour concrete into water-filled or wet surfaces or cavities from which the water cannot be displaced and drained.
• Assess the situation after the storm, and ensure you carry out an assessment of any damage and carry out repairs where necessary.
• Always consult with your leading engineer or building contractor as you plan to carry out the work.