How Do You Fix Puddles On A Concrete Driveway?

How Do You Fix Puddles On A Concrete Driveway?

How Do You Fix Puddles On A Concrete Driveway?

If your driveway was not properly oriented prior to concrete pouring, you may have a shallow region that gathers water during rainy seasons. The driveway may sink and degrade with time, as well as develop cracks and holes in the surface that hold water.

Chips, cracks, and holes can form on your driveway over time, causing uneven wear, low areas, and surface damage. Examining your driveway after each storm and dealing with puddles as soon as they appear may save you a lot of effort and money in the long run.

Puddles in your driveway might lead to floods on your lawn or in your basement. Repairing the driveway is a task that a capable homeowner may complete without the assistance of a professional.

Here’s how you can fix it:

Step 1: Locate And Mark The Locations Of Puddles.

Place a substantial item at each end of the puddle to mark the location where it forms. You may want to wait until after a significant rain to identify these problem spots. Examine the driveway from top to bottom, and keep an eye out for rain hitting the puddles. This will show you where the issues are.

Step 2: Clean The Affected Areas.

Clean each specified area with a broom or brush, then use a chisel to remove any loose asphalt or gravel. If the driveway is oily or unclean, use a commercial driveway cleaner to clean it before proceeding with the repair.

Use a heavy-duty broom or brush to apply the professional cleaner, then wash the driveway with a high-pressure garden hose or power washer.

Step 3: Apply Patching And Bonding Material.

Patch each low location in the driveway using patching material. Because each brand has a somewhat different application, follow the instructions on the packaging.

Most of the time, you’ll brush the patching material onto the driveway and smooth it out with a long-handled roller and brush. When you acquire the patching material, the hardware shop will sell you a specific brush and roller applicator.

To attach the repairing material to the driveway below, apply a driveway coating or emulsified liquid on top.

Step 4: Tamp Or Roll To Smooth.

Using a driveway roller, smooth up the mended areas. A driveway roller may be rented from your local hardware shop, and utilizing one makes repairing and sealing your asphalt much easier.

The driveway roller is meant to attach to your lawn tractor and be driven over the driveway surface to tamp it down.

If you don’t have a lawn tractor, you may tamp down the patched areas and make them level using a hand tamper.

Step 5: Dry And Seal The Patches.

Allow the patches to completely dry. To finish the repair, sealcoat the whole driveway. Use a brush and a long-handled roller to apply the seal coat. A particular roller and brush combination may be purchased at the same time as driveway sealant.

How Do You Seal Expansion Joints In A Concrete Driveway?

Expansion joints are an important part of any concrete driveway. They help to control cracking by allowing the concrete to expand and contract with changes in temperature. If these expansion joints are not properly sealed, however, they can become a source of problems.

Cracks in the expansion joints can allow water to seep under the concrete, creating a void that can cause the concrete to sink. To fix this, use a masonry blade on a circular saw to clear out the crack, then fill it with a bead of concrete-specific silicone sealant. The caulk will seal the expansion joint and prevent water from entering.

Using a roller brush, apply an equal coat of concrete sealer to the driveway and expansion joints. Water and stains are repelled by the sealer. Allow a full day for the sealer to cure before reapplying it every 2 or 3 years.

Related Posts

Select currency
USD United States (US) dollar
error: Content is protected !!

Compare