How Do You Hang Things From Concrete Ceilings Without Drilling?

How Do You Hang Things From Concrete Ceilings Without Drilling?

How Do You Hang Things From Concrete Ceilings Without Drilling?

Most individuals contemplate drilling holes when they wish to hang decorations, lights, or anything else from their concrete ceiling. However, doing so scars the ceiling and makes it seem disorderly. Is drilling the only method to hang items from the ceiling, or are there other, more ceiling-friendly options?

Here are various non-drilling methods for hanging goods from concrete ceilings:

  • For lightweight goods, use sticky wall hooks.
  • For angle clips and pins, use a powder-actuated tool.
  • On concrete, use hardwall hangers.

Many homeowners, as well as landlords, are opposed to drilling into concrete walls and ceilings. The major reason for this is that concrete is hard, and drilling through it may cause cracks. Fortunately, there are various workarounds; continue reading to learn about them.

Use Adhesive Wall Hooks For Lightweight Objects.

Adhesive wall hooks are ideal for hanging goods from a concrete ceiling, such as plants. Furthermore, adhesive walls are simple to install, and remove, and do not require any drilling.

However, they are not very strong and can only support things weighing up to 8 pounds (3.6 kg). Consider utilizing two or more sticky hooks if your object requires more support.

The hooks come in a variety of sizes, with large ones capable of carrying things weighing up to 16 pounds and measuring 24 to 36 inches (60.9 to 91.4 cm) (7.2 kg). Smaller command strips can only support 4 pounds (1.8 kg).

So, while using sticky hooks, always use the appropriate hook weight. If the thing you want to hang is heavier than the weight limit, try using several command strips. Also, be sure you utilize the hooks on a smooth, clean surface and wait approximately an hour before hanging anything.

One significant disadvantage of employing adhesive wall hooks, in general, is that concrete’s inherent bonding capacity isn’t all that great. As a result, depending on your attachment, it’s best to apply the most appropriate glue.

Pressure adhesives, for example, are good for light things, epoxy for metals, and construction adhesives for wooden products. Attach ceramic, marble, or granite ornamental pieces to your concrete ceiling with polyurethane construction glue.

It should be noted that a great adhesive bond must have good wetting properties. As a result, rather than beading on the concrete surface, the glue should spread along it.

How to Make Use of Adhesive Wall Hooks

For maximum results, use the adhesive wall hooks on a clean, flat surface free of stray particles. This is due to the fact that such particles might weaken the connection and make it less effective.

To connect an adhesive wall hook to your ceiling, follow the procedures below:

  • Clean any dust or dirt particles from the concrete surface using an alcohol swab.
  • Remove the adhesive wall hook’s paper covering.
  • Hook the hook to the wall and exert sufficient pressure on the concrete to establish the bond.
  • Hold on to the hook for around 20 to 30 seconds.
  • Allow about one minute before hanging your object to allow the glue to thoroughly attach to the wall.

Use A Powder-Actuated Tool For Angle Clips And Pins

Angle clips and pins are another methods for hanging goods from concrete ceilings. Attach track lights, a hanging divider, or a suspended ceiling to your concrete ceiling using these. Angle clips include pre-drilled holes for bolts or hanger wires.

A powder-actuated tool is required to connect them to your ceiling. The powder charge is used by the instrument to discharge the pins into your concrete ceiling.

The clips and pins are simple to install, but you must exercise caution while using the powder-actuated tool for your safety.

Use of Powder-Actuated Fasteners

The following is a basic rule to remember while utilizing angle clips and pins:

  • Clean up any clutter and remove any things from the floor space where the installation will take place.
  • Determine where the clips will be installed and mark the concrete ceiling at the precise areas.
  • Put on safety glasses and cover your ears.
  • Position a stepladder where a clip and pin will be installed, and load the powder-actuated tool with a blank cartridge.
  • With the head pointing down, place a clip on the indicated spot of your ceiling, then put the tool onto the pin’s head via the barrel and press upward.
  • Pull the trigger to secure the pin into the concrete, and continue the operation until all of the designated areas have clips installed.

When mounting a suspended ceiling, the clips should be installed 48 inches (1.2 meters) apart, with the rows 24 inches (0.6 meters) apart. Follow the manufacturer’s installation instructions for track lights or the hanging barrier.

Use Hardwall Hangers On Concrete

Hardwall hangers are far more durable than adhesive hangers and can support things weighing up to 25 pounds. They’re great for usage on concrete since they’re easy to install and include robust pins that assist hold the base to the wall. Use two hardwall hangers for hanging goods weighing more than the specified weight.

Because they cause minimum harm to your ceiling, these hanging hooks are great for rentals. They’re also simple to remove after usage with a knife or pliers.

Simply hammer the small steel nails into the ceiling until the hanger falls flat to install hardwall hangers. Hammering on the plastic portion might easily shatter it.

Related Posts

Select currency
USD United States (US) dollar
error: Content is protected !!

Compare