How Do You Install Schluter Trim Around A Window?

How Do You Install Schluter Trim Around A Window?

How Do You Install Schluter Trim Around A Window?

Schluter trims around a window are a great way to add style and function to your home. It can be a simple addition that can make a big difference in the overall look and feel of your home.

There are a few different ways to install Schluter trim around a window. You can choose to have the trim professionally installed, or you can do it yourself with a little bit of preparation.

Schluter trims around a window provide a custom look for your home. It’s easy to install and can be done in a few hours. Here are the steps:

  1. Sketch a rough outline of the trim around the window on paper: Measure the size of the window on your wall and sketch it. Then measure the distance between each corner of the window and draw lines from one to another. You may need to leave extra room for trim and have a few inches extra at each corner.
  2. Cut the trim to the outline using a saw: Using a saw, cut the trim to the size you sketched out. Schluter trim comes in sections that need to be joined together with gaps in between.
  3. Sand the trim edges smoothly: Sand the trim edges smoothly with 100-grit sandpaper.
  4. Paint the trim with the color of your choice: Paint the trim with one coat of primer and two coats of your desired color. Be sure to paint the joints between sections of the trim. Allow the paint to dry completely: Let the paint dry completely before installing it.
  5. Apply a sealant to the trim: Apply a thin coat of Schluter primer to the inside of the window frame and window casing. Then, apply a thin coat of Schluter primer to the outside of the trim.
  6. Hang the trim around the window: Use hooks to screw the trim into the window frame. Then, use screws to secure the trim directly onto the wall behind the window. This will keep your home looking neat and tidy.

How Do You Secure PVC Window Trim?

PVC trim should be secured with stainless steel screws or hot-dipped siding nails. When it comes to fasteners, don’t cut corners and use fasteners that won’t last as long as the vinyl trim. Because they will never corrode, stainless steel screws with small finish heads are the best choice.

They will not rust, even when they are exposed to water. Stainless steel nails and screws cost a little more than standard ones, but they are available at almost any home center. PVC trim that is exposed to lots of moisture should be screwed or nailed where it meets the soffit and sheathing.

Where it meets the siding, you have more options. You can either screw or nail it or use a molly fastener so you can adjust your trim as needed. You can find 3/8″ or 1/2″ mollies at local hardware stores – just match the size to the thickness of your trim.

It’s best to install the trim in a dry environment. If it’s raining or snowing, don’t install the trim until it stops. To hold down your PVC window trim so you’ll always be able to find it in the future, put a screw or nail on each end of the frame that goes into the wall.

You can also space them along the top of your trim so they won’t be hidden when installed. If you want to reposition your trim, first use a leveler to make sure your wall is plumb. Then, remove the trim from the window and screw or nail your studs. You can then replace it in the window, fastening it to any studs that come up through the wall.

Related Posts

error: Content is protected !!
0

Compare