How Do You Install Slotted Concrete Fence Posts?
How Do You Install Slotted Concrete Fence Posts?
Slotted concrete posts feature an integrated, deep groove that, once secured in place, allows a fence panel to be slotted in from the top. Other fixes are not required when utilizing slotted concrete posts.
Here’s how to put slotted concrete fence posts together.
- Determine the proper location for your post holes by measuring between them with a gravel board.
- Dig holes for fence posts that are at least 600mm deep (two feet) and three times the width of the post. Fill the hole with 3-4 inches of gravel and press it down.
- Insert the posts into the holes one at a time, ensuring proper positioning before backfilling with a concrete mix or Postcrete. This should be raised above ground level to prevent rainwater from gathering at the post’s base.
- Install the concrete gravel boards before sliding the timber fence panels into place once the concrete mix has cured sufficiently and is load-bearing.
If the gravel boards and timber fence panels are having difficulty sliding down the grooves of the concrete fence posts, just brush an old candle down the grooves first.
Can I Drill Into A Concrete Fence Post?
Yes, a concrete fence post may be drilled into. It’s easier than you think with the right tools and strategy. Before you begin drilling, you must consider several factors, including the sort of drills you will require and the specifications of your posts.
The durability of concrete might make this project more difficult, but it doesn’t imply it can’t be completed. Concrete fence posts have the advantage of being far more sturdy and lasting much longer than wood or vinyl fence posts. So, before you start drilling into them, there are a few things to consider and address.
First, select how far you want to drill and mark it on the post or on your instrument in some way. This will assist you in keeping track of your progress while you work.
Marking where you need to stop drilling with duct tape or masking tape is a smart method to do it. You may also utilize the stop bar function on your drill to help you keep track of it.
Make careful to double-check your work even after you’ve noted where you need to drill. Drill/cut once, measure twice.
Protective eyewear, gloves, weather-appropriate outdoor clothing, ear protection to help with the noise of the drills if necessary, and even protection for your nose and mouth to prevent the dust that comes from the concrete as you drill into it from getting into your body are all things you’ll need while working.
Can You Use Cuprinol Fence Paint On Concrete?
Yes, you can use cuprinol fence paint on concrete because it is formulated to stick to such surfaces. Use a clean cloth or sponge and brush off the dust. It will not harm your concrete fence post. You may also rinse with water to get off any dust that has settled on your fence post after applying cuprinol paint.
Using Cuprinol Garden Shades paint will help you alter wooden sheds, fences, summerhouses, garden furniture, and decking.
It’s fantastic product that can also be used on terracotta, stone, and worn concrete. It’s non-toxic, water-based, and preserves the wood while still appearing lovely with its paint-like matt surface.
It repels water and resists fading and is available in six trendy ‘natural’ colors, including a couple of striking blues and a wonderful soft sage green.