How Do You Remove Black Mold From Concrete Blocks?

How Do You Remove Black Mold From Concrete Blocks?

How Do You Remove Black Mold From Concrete Blocks?

There are a number of effective ways to remove black mold from concrete blocks.

However, the most ideal way is to scrub and clean the damaged areas with a mold-killing detergent, such as RMR-86 Instant Mold & Mildew Stain Remover, or a simple mix of home bleach and water is the best remedy.

Scrub vigorously to get down into the pores of the concrete. It’s also a good idea to rub the bleach into the concrete, then let it air dry in order to kill the mold on all surfaces of the concrete.

Are Concrete Blocks Good Insulators?

Yes, concrete blocks are good insulators when used in a wall with an R-value. The problem is that many people don’t use the blocks to build walls and will instead stack the blocks. When this happens, the blocks serve as an air pocket between the structure and home insulation.

While concrete has some insulated properties, it does not prevent air from infiltrating through cracks in or around the block wall. Any crack or seam in a block wall can be enough for cool air to enter your home during cooler months of the year.

How Do You Polish Concrete Blocks?

To polish concrete blocks, one popular option is to grind the blocks with a 150-grit metal-bonded diamond (or finer, if desired), apply a chemical hardener to densify the concrete, and then polish them with a 100- or 200-grit resin-bond diamond, or a combination of the two.

Alternatively, you can polish them with a 400-grit resin-bond diamond.

Whatever method you choose, use a diamond with the appropriate grits to achieve the desired results. If you want to add a bit of shine, a 100-grit diamond will work fine.

If you want to polish the concrete to a much higher level of finish, however, you’ll need to use a 200-grit or 400-grit diamond. It’s also important to take time when working with the diamond, as overworking the concrete will dull the polish.

How Do You Pour Concrete Into Cinder Blocks?

To pour concrete into a cinder block, fill the cavities with the bucket’s concrete. Pour concrete into the internal area of the block wall from the bucket. Fill cavities with concrete until they are level with the top of each block, then level the concrete with a cement trowel.

It is also a good idea to place a shovel in the bucket and allow it to take the weight of the concrete because holding the bucket will make your arms sore, and your hands will get hot.

Once this is done, let the concrete set for at least an hour or two, then remove the shovel to let it completely set.

 

 

Related Posts

Select currency
KES Kenyan shilling
error: Content is protected !!

Compare