How Much Does A Concrete Window Sill Weigh?
How Much Does A Concrete Window Sill Weigh?
Typical concrete sills of the same dimensions will weigh more than 70kg, implying that a 2.4m long sill will necessitate up to four separate concrete sill pieces, increasing labor, time, and cost. However, due to the large size and weight of the sills, other materials have been used in their place.
Recycled plastic and glass are some examples. They are more expensive but can be preferable in certain circumstances. These concrete window sill pieces are more easily taken from place to place if required. In addition, the lightweight of the plastic and glass pieces affords a faster construction timeline.
A metal window sill is a metal piece that can be placed on windowsills. They are decorative blocks that can be used to replace wooden or stone window sills and also add aesthetic value to a building’s design.
The dimensions of a typical window sill will vary depending on the type of home, but they are all relatively the same size. For example, a wooden window sill could be as small as 6″ by 3″ or 3″ by 3″, whereas a larger one could measure over 2 feet by 2 feet. A concrete sill can also be cut to any custom length and width.
Do You Drywall Window Sill?
Yes. A windowsill may be installed in some cases while the sides and top are finished in drywall. For lower-priced builder-grade homes, this is a fairly common application. Because wood trim is relatively expensive to buy and install, many builders prefer the drywall-return method to save money on construction costs.
In addition, the drywall-return method is less visually intrusive than traditional wood finish and the finished appearance might be more pleasing to some home buyers.
To drywall return, you can simply install a pair of 3/4″ x 3/4″ x 1/8″ corner post cover brackets at each end of your windowsill. The brackets are attached to a pair of 3/4″ x 2″x 1/8″ top cover boards sealed with red or white caulk or silicone along their upper edges.
Next, install a 2×10 frame across the open middle area of your window sill for support purposes and for extra protection against water damage due to leakage. This frame can be made from plywood or OSB wood strips.
After the frame has been installed and dry-fitted, you can then install drywall with your windowsill in the middle covered with a single layer of double-thickness drywall as well. If you are not comfortable handling scaffolding, you can install a low-cost platform for the top row of screws that will hold your trim board in place and then make a second pine board piece to serve as a stool to stand on while working at your windowsill.
