How Much Wider Should Curtains Be Than The Window?

How Much Wider Should Curtains Be Than The Window?

How Much Wider Should Curtains Be Than The Window?

Panels should have a combined width that is 2 to 2.5 times the width of the window to look ample and drapey when closed. Exceptions: If you’re hanging curtains to frame a window and don’t plan on closing them, round down to 1.5 times the width.

For large windows, consider buying fabric with a longer length in the window to get an extra 2.5 inches. For example, if you have a 60-inch window, buy paneling long enough to be 108 inches wide.

If you’re hanging curtains across a bay window, the extra length gives your drape more oomph and hides any awkward gaps at the sides of the curtain panels.

Also, buy curtain panels that are one to two inches longer than your window size (about 46 inches wide) to ensure that they extend beyond the top and bottom of your curtains when drawn open. In addition, consider adding wide pleats to your panels to visually balance out the drape, especially if you plan on closing them all the way.

The extra length may also be useful for covering windows that are too high for the curtain rods if you’re hanging curtains across the window. This is especially true in offices and kitchens where additional privacy is desired. For example, if your window is 59 inches tall and you’re using a 48-inch-wide panel, buy several extra inches of paneling so that it’s 60 inches to 108 inches long (or 33 inches to 63 inches wide). This will give you an extra 22-24 inches of fabric when closed.

To hang curtains on a window, measure the width of your window from outside to outside (not from inside to outside). Then measure the length of the curtain paneling.

How Do You Hang Curtains On A Side By Side Window?

There are many ways to hang curtains on a side-by-side window. One way is to use a tension rod and curtain rod. Find the center of the window and mark the spot with a pencil.

Then, measure the distance from the center of the window to the top of the tension rod. Cut the tension rod to this length. Next, measure the distance from the center of the window to the bottom of the tension rod.

The first thing you’ll need to do is measure the width of your window and the height of your curtain. Then, use these numbers to find the corresponding size of the curtain rope. Finally, follow the steps below to hang your curtains.

  1. Find the center of the rope and make a small loop.
  2. Take the bottom of the curtain and place it over the top of the loop.
  3. Hold on to the top of the curtain and pull it tight.
  4. Repeat the process with the other end of the rope.
  5. Put the curtain up and adjust it until it’s the desired length.
  6. Make sure the curtain is hanging straight and adjust the ropes if needed.

Cut the curtain rod to this length. Thread the tension rod through the holes in the curtain rod and attach the ends to the center of the window. Then, pull the curtain rod tight to hold the curtains in place.

When it comes to hanging curtains on a side-by-side window, it can be a little tricky to figure out exactly how to do it. However, with a few simple steps, you can easily get the job done.

First, measure the height of the window and the width of the panel of curtains you want to hang. Next, mark the height and width of the brackets on the wall where you want the curtains to hang. Finally, use the measurements you took to create a template for the brackets.

Once you have the brackets ready, insert the screws into the wall and attach the templates to the brackets. Then, hang the curtains by threading the curtain cord through the brackets and

Related Posts

Select currency
USD United States (US) dollar
error: Content is protected !!

Compare