What Does A 6 12 Roof Pitch Mean? A 6/12 roof pitch means that the roof rises 6 inches for every 12 inches in depth. This is a common residential roof pitch and is considered “walkable”. The angle of a 6/12 roof pitch is 26.57 degrees. When calculating the length of rafters for a 6/12 […]
What Does A 9 12 Roof Pitch Mean? A 9/12 roof pitch is a roof slope that rises 9 inches for every 12 inches of horizontal distance, or run. This angle is equal to 36.37 degrees. A 9/12 roof pitch is the steepest standard slope and anything above a 9/12 is considered a steep slope. […]
What Does Soak Wells Mean In Drainage? A soakwell is an underground structure which allows rainwater to drain away. It typically consists of concrete, polypropylene, PVC or plastic and may be found with or without concrete pavers or lids which resist pressure from above. Soakwells are typically 500mm to 300mm below ground with the bottom […]
What Is CDX Plywood? CDX plywood is a type of plywood made up of thin veneer sheets that are glued and held together with linking plies. It is known for its strong resistance to cracking, breaking, or warping. The “C” and “D” in CDX refer to the grade of the plywood on each side, with […]
Difference Between Architectural Shingles Vs 3 Tab Shingles? The main differences between the two are in their design, durability, and appearance. First, Architectural shingles, also known as dimensional shingles, are thicker and heavier than 3-tab shingles. They are designed to give a more three-dimensional look to the roof, with a texture and depth that mimics the […]
What Is Tar And Gravel Roofing? Tar and gravel roofs, also known as Built Up Roofs (BURs), are a type of flat roofing system composed of alternating layers of asphalt-based sheets, hot tar, and roofing felt. The topmost layer is lined with light-colored gravel which protects the layers against sun exposure. Tar and gravel roofs […]
What Does Metal Furrings Mean In Construction? Metal furring is a construction method that involves the use of non-structural metal attachments to hold a finish material in place. These attachments are typically made of long, light gauge materials of various shapes and are used to support one layer of material over another or to hold […]
What Are The Advantages Of Padauk Wood? Padauk wood is a tall tree of the dense rainforests of tropical and equatorial Africa. It is known for its durability, strength, and stability properties, making it a versatile wood that can be used for various purposes. Padauk wood is highly durable and resistant to rot, termites, and […]
What Is Solar Shading Architecture? Solar shading architecture is a method of controlling the amount of solar heat gain and visible light that enters a building. It can be achieved through fixed or moveable (dynamic) solar shading devices, such as solar control glazing, angular selective shading systems, architectural canopies, and dynamic screens. Solar shading reduces […]
What Does Statutory Approvals Mean In Construction? Statutory approvals in construction refer to the permissions, consents, licenses, and other approvals required by applicable laws or regulations for a building project to proceed. These may include planning permission, building regulations approval, listed building consent, outline planning permission, product approval, project approval, government approval, and other statutory […]