Rebar Benders | Hydraulic Rebar Bender Cost/Prices | Rebar Bender Safety Tips
Hydraulic Rebar Bender Cost/Prices |Manual Rebar Bender | Homemade Rebar Bender
What are Rebar benders ?
Rebar benders are a machine used for bending metal rebar. This tool is typically powered by an air compressor, and will help you to bend the rebar in any shape desired. It allows for more flexibility than other methods of bending such as hand tools, which can be very time-consuming and laborious.
With this machine, the process can be done much faster with higher precision levels than would normally be possible without it.
Rebar benders are used to bend steel bars into curves. Rebar benders are often used to create custom fit rebars for various needs. It can be difficult and time-consuming to get the right dimensions without using a rebar bender, but this machine makes it easier.
Rebar bending also has other uses such as creating curved steel bars for architectural design purposes or producing customized fittings for any type of construction project that requires metal reinforcement.
They are typically made of cast iron, but also can be forged from aluminum or hot rolled steel.
Rebar bender machines have a cylindrical form with a number of channels for the bar and often include an attached hydraulic pump.
The machine consists of two parts: the fixed cylinder and the movable cylinder that is fitted on top.
The movable cylinder is rotated by means of a crank handle which turns gears in its axle to move it back and forth within the frame, thus bending the bar against its resistance as it slides through one channel after another.
This process creates expensive shapes like arches, hoops or circles – all without welding or cutting them apart first!
Hydraulic Rebar Bender Cost/Prices
The cost of Portable Rebar Bender (Electric Hydraulic Bender) machine ranges from $500-$1600 depending on what features you want like whether or not it includes a hydraulic lift system or increased power capabilities.
Rebar Bender Safety Tips
Rebar bender is an important tool in the construction industry. A rebar bender is a machine used to bend steel and other heavy metal bars.
Rebar benders are widely used in the building and construction industries. These machines allow you to precisely bend heavy steel bars. When using a rebar bender, you must take the safety precautions outlined below.
1. Go Through the Manufacturer’s User Manual.
All rebar benders come with a user handbook from the manufacturer. The following information is included in the user manual:
- A schematic illustrating all of the tool’s functional components.
- Instructions for the work area and electrical safety
- Personal safety precautions
- Use and servicing of hand tools
- Maintenance and service
- Instructions for use
- List of parts
The instructions in the manual explains how to use the equipment appropriately, create a safe working environment, and exercise personal safety measures to avoid injury or death.
2. Put on the Proper Personal Protective Equipment (PPE)
Personal protective equipment (PPE) is defined by OSHA as devices that safeguard a person who is exposed to hazardous situations or works with potentially hazardous equipment.
What is the proper PPE to wear when working with rebar benders?
- Mask for dust
- Goggles or glasses that are shatterproof
- Safety shoes with non-slip soles
- The hard hat
- Clothing that is form-fitting, comfy, and not too baggy
3. Take Care When Using Your Hands
The rebar bender moves the bar to the roller segment. The bending movement is swift and powerful. As a result, when operating the bender, you should avoid putting your hands near the metal rebar.
Also, while operating, keep your hands away from the pivot shoe, cutting blocks, and rollers. Finally, don’t go too far.
Always maintain correct footing and balance. This allows for improved control of the power tool in unforeseen situations.
4. Before Using the Rebar Bender, Warm It Up
Although rebar benders and rebar cutters can be used immediately after being plugged in, you should allow the bender to warm up (particularly in cold weather) before using it.
Warming up the bender before using it reduces stress on the moving parts and helps it to execute its function safely without causing additional stress to the part.
5. Put the Bar Properly positioned on the Bender Platform
When putting the bar between the bending rollers or cutting blocks, ensure that it is flat on the machine surface and at the proper angle.
Before you lay the bar on the platform, determine the proper bending angle. Incorrect positioning can cause the bar to project at an incorrect angle and strike you. This can result in serious bodily harm.
6. Take Appropriate Training Before Using the Rebar Bender
Before using a rebar bender, as with any other piece of equipment, you should get training. If you want to be a professional bender user, you can enroll in apprenticeships or attend classes that will give you credit toward welding programs.
Because most states do not require rebar workers to have a license or certification, it is critical that you receive some form of training before using the equipment for your own safety and the protection of those around you.
7. Electric Power Safety for Rebar Benders
Disconnect the bender’s plug from the power source or battery pack if you need to perform any adjustments, inspections, or repairs/replacements.
By turning off the power, you will prohibit the tool from operating and limit the risk of damage while working on the machine.
To prevent the risk of electrocution, the bender plug must fit into a conventional wall or power strip outlet without modification.
Avoid contact with earthed or grounded surfaces such as metals, appliances, or other machinery that is grounded. Use the power cord gently and remove or protect it from hazardous conditions or moisture.
Homemade Rebar Bender