10 Most Common Samsung Refrigerator Error Codes 88 88, 83E, 85E, or 86E
10 Most Common Samsung Refrigerator Error Codes 88 88, 83E, 85E, or 86E
Samsung Refrigerator Error Codes
The error codes can be used for troubleshooting a basic problem and they can get you the specific error code you need to eliminate it. Some codes are more difficult than others but are worth looking at such as the F1 code which is usually a freezing issue. Be careful and double-check to make sure you’ve got the right code before you start troubleshooting.
It’s distressing to see a bunch of numbers, letters, or blinking line segments on your refrigerator’s display, but don’t panic; they are merely error codes. We will assist you in deciphering the code and ensuring that your refrigerator receives the attention it requires.
Samsung Refrigerator Display Blinking
A blinking temperature indicator is attempting to attract your attention, usually because the temperature has risen too high and things need to cool down. It could also be due to a door being left open. Any other blinking lights may necessitate a power cycle to resolve.
If the temperature inside your refrigerator exceeds 59 degrees Fahrenheit, the temperature display or temperature bar will blink. When the temperature returns to normal, it will automatically cease blinking.
Samsung Refrigerator Display Blinking 88
It could be severely damaged by an unexpected power outage, large peak currents, or burned out owing to a network short circuit. And, because this component regulates the operation of all electronic components and power boards, it must be replaced. Only in this circumstance will error 88 no longer appear on the screen.
Samsung Refrigerator Error Codes 88 88, 83E, 85E, or 86E (Voltage or Power Error)
These errors can arise if there is a power surge or other electrical abnormality, such as a brown out, which can trigger a communication problem.
Unplug the refrigerator or turn off the electricity at the circuit breaker for 60 seconds, then re-energize it.
Error Codes for Samsung Refrigerators 83E
Error 83E: Compressor Abnormal Current Detection Error-An abnormal current to the compressor is detected. It’s possible that a power surge or other electrical malfunction happened.
Error Codes for Samsung Refrigerators 85E
Error 85E: Compressor Under Voltage Error-A brown out scenario may have occurred.
Samsung Refrigerator Error Codes 86E
Error 86E: Compressor Over Voltage Error- A power surge, such as during a thunderstorm, may have happened.
Error Codes for Samsung Refrigerators 88 88
Error 88 88: Communication Fault-This error might occur if power is interrupted during bootup.
Why Is My Samsung Fridge Display Flashing?
A blinking temperature indicator is attempting to attract your attention, usually because the temperature has risen too high and things need to cool down. It could also be due to a door being left open. Any other blinking lights may necessitate a power cycle to resolve.
How Do I Reset My Samsung Refrigerator Control Panel?
To reset your Samsung refrigerator control panel, press and hold the Power Cool and Power Freeze buttons simultaneously for roughly 10 seconds, or until the numbers on the display reset.
Samsung Refrigerator Blinking Red Light
A filter indicator light on a Samsung refrigerator indicates when it is time to change the water filter. The light starts off blue, suggesting that it has a new filter. When the filter is five months old, the light becomes purple.
When the light becomes red, the filter must be replaced. When you replace the filter, the indicator light should return to its original blue color. If the red filter indicator on your Samsung refrigerator will not turn off, you can force a reset.
