What Are The 3 Disadvantages Of A Shed Roof?

What Are The 3 Disadvantages Of A Shed Roof?

What Are The 3 Disadvantages Of A Shed Roof?

The three major drawbacks of a shed roof are:

1. The need for boxed gutters.

This is because a shed roof has only one slope, and gutters must handle twice as much water when it rains; hence boxed gutters are needed, which will also catch any flying debris.

2. A simple design does not appeal to everyone.

Shed roof designs can be very simple or very complex. A simple design will usually not have a lot of features, and a more complex design may have many features to satisfy the desires of the owner.

3. Not for larger houses.

The shed roof is suitable only for smaller houses and buildings. While the span can be extended by adding a ridge beam, this will make the roof heavier, increasing the load on the supporting structure.

This makes it unsuitable for long-span structures like those in tall buildings or large warehouses.

Another disadvantage of shed roofs is that they require more space below than a gabled roof of equal height. This is because there is no space between the wall and the roofline on a shed-style house.

By contrast, with gable roofs, a lack of wall area at their ends allows storage areas directly beneath them, which may be used as outbuildings or garages.

What Is The Best Wood To Use For A Shed Roof?

Oriented strand board (OSB) is the most common material used in construction. Because it is the least cost alternative for sheathing the walls, and roof of a shed, oriented strand board (OSB) is commonly used for sheds and dwellings.

OSB is constructed of softwood chips bonded together in a semi-random manner. OSB, like plywood, is commonly available in 4 ft. by 8 ft. sheets.

It is typically a three-layered material with a middle layer of long cellulose fibers (oriented strands) arranged in a crisscross pattern. This orientation improves the shear strength of the panel.

The top and bottom layers are typically thicker and have an embossed texture on one side to facilitate stacking in manufacturing; this texture is not present on the interior side when installed.

OSB is intended to be used on a home’s exterior but can be used under some circumstances on interior walls where adequate ventilation exists.



Related Posts

error: Content is protected !!