What Is Broom Finish Concrete?

What Is Broom Finish Concrete?

What Is Broom Finish Concrete?

Broom finish concrete is a type of concrete that provides a non-skid surface. It is created by running a broom over the partially set concrete, which creates small ridges on the surface to provide additional traction.

This type of finish is commonly used on exterior steps and walkways as it helps reduce the risk of slipping and falling.

In addition, it can be left with its natural gray color or can be stained in a range of colors.

Broom finish concrete offers durability and low maintenance as it does not require any sealers or coatings for protection against the elements and general wear-and-tear.

When Should You Broom Finish Concrete?

Broom finishing concrete is the process of giving a textured surface to a freshly poured concrete slab.

The ideal time for broom finishing is when the concrete has firmed up sufficiently to take an imprint but still remains somewhat plastic underneath.

This means that the surface of the concrete should have lost its sheen and you should be able to make a deep impression on it with your finger.

If you wait too long, the floor may harden beyond this ideal point and become more difficult to broom finish properly.

Do You Seal Broom Finish Concrete?

Yes, broom finish concrete should be sealed. Concrete sealing helps protect the concrete surface against damage caused by water absorption, staining and chemical spills while also making it easier to clean.

Sealed concrete is more resistant to cracks and deterioration from de-icing salts, freeze/thaw cycles, and other harsh elements like oil and antifreeze.

Sealers also provide a high-gloss or satin sheen for decorative appeal.

The sealer should be applied at least 24 hours after the broom finish has been completed in order to allow enough time for the concrete surface to cure properly.

How Do You Broom Brush Concrete?

Broom brushing concrete is a simple and effective way to improve its appearance.

  • To do it, start by sweeping the concrete clean of dirt and debris.
  • Once the surface is clear, you can use a stiff-bristle push broom to work in the desired pattern (horizontal or vertical lines) starting from one corner of the area and working your way across.

The goal is to create an even layer of brushed lines on top of the concrete surface, filling in any crevices that may have resulted from pouring or finishing errors.

Applying pressure as you go will yield optimal results – make sure not to leave any areas untouched! Afterwards, allow this layer to dry before applying sealant or paint if desired.

Is Broom Finish Concrete Cheaper?

Broom finish concrete is a cost effective way to create an attractive finished look for concrete surfaces.

It is less expensive than its alternatives, such as stamped or colored concrete, and is also a relatively quick and simple process.

Broom finish concrete can be used in both residential and commercial settings, and provides a durable, low-maintenance solution that will last for many years.

The cost of broom finish concrete depends on the size of the area being covered, the quality of materials used, and any additional services needed.

In most cases, broom finish concrete is cheaper than other options due to its ease of installation and material costs, making it an economical choice.

Can Broom Finished Concrete Be Stained?

Yes, broom finished concrete can be stained. When it comes to staining a broom finished concrete surface, the process remains much the same as with any other type of concrete.

The most common way to stain a broom finished concrete is through chemical stains. This involves applying the stain to the surface and then allowing it to set into the pores of the concrete, providing a more natural finish that will not peel or flake off.

Another option is to use an acid-based stain and leave it on for a longer duration to achieve a deeper and more vibrant color.

Depending on how dark you would like your final result, you may need multiple applications of either type of stain.

Is Exposed Aggregate Concrete Better Than Broom Finish?

Exposed aggregate concrete is a unique, decorative form of concrete that involves a special process to create a textured finish.

While broom finish concrete is a simpler and cheaper option, exposed aggregate is usually considered the superior choice because its decorative appeal, longevity, low maintenance and skid resistance makes it ideal for exterior projects like driveways and patios.

Exposed aggregate has higher durability compared to broom finish as it is less susceptible to cracking or scaling due to colder temperatures or harsh weather conditions.

It also provides better traction and slip resistance than broom finish by exposing stones in the mix which provide better grip when walking on wet surfaces.

Overall, exposed aggregate concrete offers more benefits over broom finish which makes it worth considering for any outdoor project.

Related Posts

error: Content is protected !!