What is The Average Size of a 3 Bedroom House?
What is The Average Size of a 3 Bedroom House in Kenya?
The average size of a 3 bedroom house in Kenya is approximately 1,080 square feet (100 square metres). The size may however vary, but the average size is approximately 80 to 150 square metres.
It is important to remember that the size of a house can vary depending on the location. Houses in rural areas are typically smaller than those in urban areas.
The average cost of buying a 3-bedroom house in urban Kenya is approximately 6,000,000. The average monthly rent for a 3-bedroom house in Kenya is approximately KES. 15,000. The average utilities cost for a three bedroom house in Kenya is approximately KES. 5,000
The average cost of building a stand-alone three-bedroom house in Kenya is approximately KES. 2,500,000.
The cost of a fully furnished 3 bedroom house ranges from as low as Ksh. 7,500,000 to as high as Ksh. 14,000,000.
What Are The Key Features Of A 3 Bedroom Bungalow House In Kenya?
There are several factors to consider when designing the floor plan for a three-bedroom bungalow. The first consideration is how much space is needed for the bedrooms and common areas.
The second consideration is the positioning of the rooms in relation to the sun and windows.
Assuming a 3 bedroom bungalow with a 100-square meter area, it should typically feature a living room, a dining room, a kitchen, and three bedrooms (master bedroom ensuites), with one to three bathrooms.
The living room is usually the largest space in the bungalow and is where families typically spend the majority of their time together. The kitchen is typically smaller but is still large enough to cook and prepare meals comfortably.
The bedrooms are typically a good size, and each usually has its own in-built wardrobe or closet for the master bedroom. One bathroom is typically standard in a Kenyan bungalow, and is typically located near the bedrooms.
Again, bedrooms can be arranged so that each has its own en suite bathroom. The house should also have a porch, a garden, and a garage.
To summarize, the following is a suggested floor plan for a three-bedroom bungalow:
-The bedrooms should be located on both sides of the house with a central living/dining area and kitchen.
-The bedrooms should be a good size, with enough room for a medium-sized bed, dresser and nightstand.
-The living/dining area should be spacious, with room for a large dining table and chairs, as well as a comfortable seating area.
-The kitchen may have provision to be well-equipped with a stove, refrigerator, and sink. It should also have lots of counter space and cupboards.
-The bathroom should be located near the bedrooms and can have a shower.
-The house should be designed for energy efficiency, with large windows that allow natural light and ventilation.
Building Materials Required for 3 Bedroom House
The building materials required for a 3 bedroom house vary depending on the specific design and materials used. However, some common materials that would be used in the construction of a 3 bedroom house include cement, gravel, sand, timber for framing, bricks, blocks for walling, exterior siding, roofing materials, windows, doors, and interior finishes.
Depending on the chosen materials and design, the cost of building materials for a 3 bedroom house can range from eight hundred thousand dollars to three million Kenya shillings.
Most three-bedroom houses in Kenya are around 100 square metres in size. . However, there are a few that are slightly larger or smaller.
A three-bedroom house typically requires 50 by 100 plot or 1,500 to 3,000 square feet of building space, depending on the design and size.
A three bedroom house typically requires about 1180- 300 bags of cement, 50 to 00 roofing sheets, 3000 -6000 feet of timber, about 50 reinforcement bars, 2600 to 3500 blocks or machine cuts.
Other most important materials include tiles, fitting materials, drainage and plumbing, insulation, and drywall.
Here is a list of construction materials
- Ballast
- Quarry Stones/Bricks.
- Rebars
- Mabati/Roofing Sheets.
- Ceiling Board.
- Paints
- Electrical Fittings
- Drainage and Plumbing Materials
Get Instant Cost Estimates Below (Calculator)
How To Use The Construction Cost Calculator
Step 1: Adjust the Plinth Area to the estimated Total Area of your upcoming house. E.g, 2 Bedroom = 60 Square Metres, 3 Bedroom from 80 Square Metres, etc…
Step 2 : Choose the Type of Finishing, Roofing Type, and Flooring Type. Approximate project cost will be indicated below this.
Step 3: You can also include contact details and submit
Instant Calculator
