What Materials Do You Use To Cover A Cinder Block Wall?
What Materials Do You Use To Cover A Cinder Block Wall?
Cinder brick walls are functional and inexpensive, but they aren’t usually the most appealing alternative, and they’re not very weathertight when left unfinished. Covering a cinder block wall increases its longevity and helps it blend in with the surrounding architecture.
Depending on the aesthetic you want, there are numerous approaches to the job. However, before applying any form of cover, clean the wall and fix any damage. Here are the materials use to cover a cinder block wall;
Use Of Concrete.
Surface bonding cement is the easiest approach to produce a concrete finish on a cinder block wall. Concrete aids in building insulation and moisture control. It produces a smooth, polished surface that can be left alone or painted.
Concrete pigment is the way to go if you want a colorful wall but don’t want to paint it. Concrete also allows you to get any texture you choose, such as polished, broom-brushed, or sponge-finished.
Surface bonding cement contains acrylic and fiberglass to make it simpler to apply to vertical surfaces, making it a viable option if you’re unfamiliar with dealing with concrete.
Prepare the concrete mixture first before applying this cement. Wet the whole cinder block wall thoroughly, then re-wet a 3 to 6 sq. ft. portion of the wall. To allow the mixture to adhere correctly, the wall must be damp.
Apply a 1/4-inch coating of the mixture to the re-wet portion as evenly as possible with a trowel or paintbrush. Re-wet another part and work on one section of the wall at a time until it’s completely coated. Renting a concrete sprayer will allow you to complete the work more quickly.
Stuccoing.
Stucco is a basic, simple finish that is more attractive than concrete and works especially well for southwestern-style homes. Because stucco is constructed of cement, lime, and silica, it has many of the same advantages as concrete. You may use concrete pigment or paint the wall your desired color, just as with concrete.
A hawk, a flat tray with a handle in the center, is required to apply stucco. The application technique for stucco mixture varies according to the manufacturer, but for the most part, you’ll need to apply a bonding agent with a paintbrush or sprayer and let it cure overnight.
After that, you’ll apply an initial layer known as a scratch coat, which takes several days to cure and must be misted on a frequent basis while it dries. To complete the task, add the last layer, which allows you to create designs such as swirls and waves.
Vinyl Siding.
If your home has vinyl siding, putting siding to the external cinder block walls of your outbuildings will help to make your property seem more coherent. Siding is available in a variety of colors and textures, including those that simulate wood and stone, making it simple to get the desired effect.
Before you can put vinyl siding on a cinder block wall, you must first nail or screw furring strips into the seams between the blocks. Furring strips are thin wood strips used to provide space between the wall and the siding. The vinyl trim, followed by the siding itself, may then be installed onto the furring strips.
Artificial Stone.
A stone wall’s ageless beauty complements almost every landscape. Stone wall veneer allows you to transform a dull cinder block wall into a landscape feature with a touch of elegance. These veneers are made to seem like actual stone and come in a number of forms such as slate, ledge stone, fieldstone, and river rock.
The actual installation procedure varies on the design you select, but in general, you’ll simply need to apply mortar to the sections of the veneer and push them straight onto the wall.
Lay the veneer panels down on the ground in the design you want for the wall to guarantee you obtain the desired effect. After installation, some veneers, such as imitation fieldstone, require grouting.
Climbing Plants.
Climbing plants are a wonderful and simple method to generate a natural look for your wall. Attach a lattice to the wall using concrete screws to assist the plants spread out.
You may create your own lattice using narrow wood slats or, for a more rustic aesthetic, tree branches linked together with wire or rope. Place spacers between the wall and the lattice to allow the plants to wrap around it.
Keep your climate and the plant’s weight in consideration while selecting plants. Wisteria, a hefty plant, may easily take down a lightweight lattice or even a whole wall. Ivy, clematis, cup and saucer, and sweet pea are all good options.
