Brick Coursing Dimensions | Brick Dimensions Table in Inches & MM

Brick Coursing Dimensions | Brick Dimensions Table in Inches & MM

Brick Coursing Dimensions | Brick Dimensions Table in Inches & MM

Brick coursing is a process of arranging brick or stone in a series of courses such that the horizontal and vertical joints between the courses are staggered.

The bricks should be parallel and perpendicular to the wall. Brick coursing is an integral component of the design and construction of brick or stone buildings, and is an important part of making the building aesthetically pleasing.

The spacing between each course can vary, but will always be consistent within a single building.

The dimensions of brick coursing are typically expressed in terms of a linear dimension and a multiplier, such as 12x 8.  In this example, the brick coursing measures 12 inches wide and 8 inches tall.

There are many different aspects of brick coursing that should be considered when constructing a project, but one of the most important is the dimensions of a brick coursing.

There are 3 different dimensions that can be used:

  1. Length: The length of the brick coursing can help determine the number of courses to be placed. The length of the brick coursing can help determine the number of courses to be placed.
  2. Width: The width of the brick coursing can help determine how to place the brick coursing. The width of the brick coursing can help determine how to place the brick coursing.
  3. Height: The height of the brick coursing can help determine how many courses high a project is.

Brick Coursing Gauge

A brick coursing gauge is a measuring instrument, typically used by bricklayers and masons in North America and the United Kingdom to measure the thickness of mortar joints. The gauge consists of two horizontal bars, one fixed and one movable.

Brick coursing is often measured using a brick coursing gauge, which consists of two horizontal bars, one fixed and the other movable, typically consisting of a sliding metal or wooden plate.

The movable bar is used to measure the mortar joint width (or “coursing”, sometimes also referred to as ‘biscuit coursing’).

The width is measured when the movable bar is pressed against the face of a series of bricks laid in a regular pattern.

The distance from the fixed bar to the mortar joint is calculated using basic geometry and the distance between bricks laid perpendicular to either bar determines the thickness, usually in millimeters.

To measure the width of a brick, each corner is marked with a 90-degree angle to provide accurate measurements. The two marks are 0.50m and 0.20m apart from each other on each corner of the brick, for example:

This measurement can then be used in conjunction with the lengths (0.75m and 0.25m) and the thickness (0.6mm). These measurements must be accurately recorded on the scale.

Brick Dimensions Table in Inches & MM

Type of Bricks

Characteristics of Bricks

Imperial length x depth x height

Standard size of brick in MM

Block BricksConstructed using concrete or cement. They may include a hollow core to make them lighter and to improve their insulation.440 x (varies) x 215
Modular BricksCommonly used for the construction of buildings and residential homes.7-5/8″ x 3-5/8″ x 2-1/4″194 x 92 x 57
Jumbo modular Bricks7-5/8″ x 3-5/8″ x 2-3/4″194 x 92 x 70
Queen BricksSlightly smaller and more cost-effective than a modular brick.9-5/8″ x 3-1/8″ x 2-3/4″244 x 79 x 70
King Bricks9-5/8″ x 2-3/4″ x 2-5/8″244 x 76 x 67
Engineer BricksUsed where strength and water/frost resistance are required. Very sturdy and reliable to use.7-5/8″ x 3-5/8″ x 2-13/16″194 x 92 x 71
Closure BricksUsed to finish off a wall, especially at the corners7-5/8″ x 3-5/8″ x 3-5/8″194 x 92 x 92
Norwegian BricksSubstantial bricks that can be used in loadbearing walls while still looking good. They have a natural beauty to them.11-5/8″ x 3-5/8″ x 2-13/16″295 x 92 x 71
Monarch BricksCommonly used for long stretches of wall and are very strong.15-5/8″ x 3-5/8″ x 3-5/8″397 x 92 x 92
Utility BricksVery versatile and can be used for a range of construction projects.11-5/8″ x 3-5/8″ x 3-5/8″295 x 92 x 92
Norman BricksThese are classic industrial bricks for construction projects and commonly come in red or white.11-5/8″ x 3-5/8″ x 2-1/4″295 x 92 x 57
Roman Bricks11-5/8″ x 3-5/8″ x 1-5/8″295 x 92 x 41
Quad Bricks7-5/8 x 3-5/8″ x 7-5/8″194 x 92 x 194
Danish hand mould7-5/8″ x 3-5/8″ x 2-1/4″194 x 92 x 57
Meridian Bricks15-5/8″ x 3-5/8″ x 3-5/8″397 x 92 x 92

 

Brick Coursing Dimensions FAQS

 How big is a course of bricks?

A course of bricks is the number of bricks laid one length side by side, or two widths apart in order to complete a line.

For example:

A 10-inch brick laid four inches deep is a 10-inch x 4-inch course. A 12-inch brick laid six inches deep is a 12-inch x 6-inch course. A 16-inch brick laid eight inches deep is a 16-inch x 8-inch course.

What is the thickness of a brick?

The thickness of a brick is the measurement from one side to the other of an individual brick. The thickness does not include the mortar used to hold the bricks together.

How do I measure the width of rows of bricks?

The width of a row is the number of bricks laid one length side to side, or two widths apart in order to complete a line.

What is the dimensions of a standard brick?

There are three dimensions that individual bricks can be specified by:

Length – the length of the brick from one side to the other.

Width – The width of the brick measured between two opposite points.

Height – the height of the brick measured from one edge to another

How do I measure a standard brick?

In conventional building, bricks are laid in mortar to produce a range of dimensions. The most common are described below:

  • The length of a brick from one side to the other.
  • The width of a brick measured between two opposite points.
  • The height of the brick measured from one edge to another.

What is the brick dimensions in MM

The standard brickwork coordinating size is 225 mm x 112.5 mm x 75 mm (length x depth x height).

It comprises 10 mm mortar joints, making the normal brick dimension 215 mm x 102.5 mm x 65 mm (length x depth x height).

What is the standard brick dimensions in inches

In conventional brick construction, standard bricks are laid in mortar to produce a range of dimensions.  A typical brick measures 2-1/4 inches wide by 7-1/2 to 8 inches long.

To accommodate for the mortar bond between adjacent bricks, add 1/2 inch to both the length and thickness. A brick measuring 2-1/4 inches by 7-1/2 inches plus mortar joints, for example, will take up 2 3/4 inches by 8 inches.

Related Posts

Compare

0