Can You Put A Shingle Roof On A Mobile Home?

Can You Put A Shingle Roof On A Mobile Home?

Can You Put A Shingle Roof On A Mobile Home?

When installing shingles on a mobile home, the process is no different than it would be for a traditional site-built home. However, there are a few key considerations to keep in mind.

First, it is generally accepted that two or three layers of shingles are acceptable for a site-built home, but only one layer should be used for a mobile home.

This is due to the fact that mobile homes are typically lighter in weight than site-built homes and thus can’t support the additional weight of multiple layers of shingles.

Second, if your shingles need to be replaced, it is important to remove and replace them completely rather than simply adding a new layer on top of the old ones. Otherwise, you could be putting yourself and your family at risk of water damage.

Can You Replace A Shingle Roof With Tile?

A shingle roof can be replaced with tile in two ways. One option is to replace the shingles with new underlayment and then put the tile roof on top. This is generally the quickest option because it does not need pulling down the previous roof.

The alternative option is to remove the shingles and start over, installing new underlayment and the tile roof. This is typically the most comprehensive method since it allows you to evaluate the roof deck for damage and make repairs as needed before installing the new roof.

Do You Need A Drip Edge On The Shingle Roof?

Yes, you do. The shingle roof is not watertight by itself and needs the drip edge to keep moisture from building up and causing damage.

This can help prevent leaks in other parts of your home, too. Water may end up beneath the shingles without a drip edge, causing damage to various components of the house.

Though your property may not have had a drip edge built at the time, drip edges are now mandated by most building regulations in North America to protect properties from damage caused by water intrusion.

When the shingles on the roof are damaged by hail or high winds, this often means the roof deck underneath has been damaged.  If you don’t have a leak on your roof that you can identify and fix, you probably have a leak in your roof deck.

If the outer layers of shingles are cracked, but there is no leak on the surface of your roof, then these cracks may not be due to an actual problem with the roof.

Rather, they may be caused by shrinkage of materials because of temperature changes or differences in moisture levels between where it was manufactured and installed.

How Do You Do Valleys On A Shingle Roof?

When creating valleys on a shingle roof, there are key things to keep in mind. First, it’s important to ensure that the shingles are properly installed and secured.

This will help to ensure that the valley is properly formed and won’t leak. Next, you’ll need to create a starter course for the valley.

This can be done by installing a strip of shingles along the edge of the roof, making sure to overlap the shingles in the valley. Once the starter course is in place, you can begin installing the shingles in the valley.

It’s important to ensure that the shingles are properly staggered and that they overlap to create a watertight seal. You may want to add flashing to the ends of the shingles to seal any gaps that may form in between shingles.

Finally, you will need to secure the valley with a drip edge. If you find that your roof deck is damaged in any way — whether from hail or high winds — you should have a qualified roofer complete this work for you.

Related Posts

error: Content is protected !!