Do You Need Scaffolding To Replace Sash Windows?

Do You Need Scaffolding To Replace Sash Windows?

Do You Need Scaffolding To Replace Sash Windows?

No. Scaffolding is only required for the installation of windows or doors in locations that are higher than 18 feet. The homeowner can install their double-glazed sash windows with only one helper. The helper should be able to move the window up and down while the homeowner holds it steady.

This type of installation needs to be done on a flat roof that has been properly cleaned. For example, if the roof is made of wood, it must be cleaned with water and sand so that the new window will fit on top of it securely.

If the double-glazed sash window is not properly secured to the flat roof, there may be water leaks and damage to the newly installed window or possibly even damage to the house. The homeowner should make sure they have properly measured the height of where they want to install their double glazed sash window.

They should also make sure that they do not block any vents or other openings in their house when installing their new double glazed sash window. Workers should wear gloves, goggles and sturdy work clothing. The homeowner should wear clothing that covers their arms, legs and feet.

They should be wearing a hard hat and steel-toed boots while they are on the roof to make sure they will not slip and fall off of the roof. The homeowner can choose to purchase scaffolding if they do not feel comfortable installing their double glazed sash windows without it.

If the double-glazed sash window is being installed on top of the flat roof that has previously been cleaned, there is no need for scaffolding.

How Do You Install A Tension Spring On A Window Sash?

When installing a tension spring on a window sash, it is important to follow the correct steps in order to avoid any damage to the window. The steps involved in installing a tension spring on a window sash are as follows:

  1. Measure the width of the window sash opening.

This measurement will help in determining the size of tension spring that will be required. Compute the width of the sash opening by adding 3/16 inch to the measurement of the window sash.

  1. Purchase the appropriate tension spring.

The tension spring must be of the correct size and thickness in order to fit the window sash opening. This measurement will help in deciding on which type of tension spring to purchase. The larger the tension spring, the more force is needed to operate the window sash.

  1. Cut the tension spring to the appropriate size.

The tension spring should be cut to the same width as the window sash opening. Determine whether you require a coil compression spring or a flat compression spring. This can be determined by consulting with your hardware supplier.

  1. Install the tension spring on the window sash.

The tension spring should be installed so that the end is facing outwards. This will ensure the tension spring will stay in place when in use.

  1. Install the window sash.

The window sash should be installed so that the end of the tension spring is lined up with the opening in the window frame.

 

Related Posts

Select currency
USD United States (US) dollar
error: Content is protected !!

Compare