How Do Window Latches Work?
How Do Window Latches Work?
Window latches are installed on the top of your window frame and are attached to the window sash. The latch has a hook that extends from the bottom of your window and fits into a channel on the side of your window frame.
When you want to lock or unlock your windows, all you need to do is push or pull on the tilt latch hook to engage or disengage it with your window’s side channel.
When you push or pull on it, it will stick out from the side of the channel enough that you can use a key to unlock the sash and open it without having to pull up on it until it fits in place over its locking pin.
Window latches were invented at the dawn of the 20th century. It is believed that window latches were originally developed to protect houses from burglars, but even during the early stages of their development, they became popular for general home security as well.
The most common applications are to keep backyard doors locked when children are playing outside in their yards as well as keeping windows closed when people aren’t around. Some people feel that a window latch is not enough to secure their home’s windows because they can be unlocked easily; however, they believe this is an advantage of these devices.
Window latches have some advantages over other types of window locks because there isn’t any extra hardware to attach or move anywhere else after installation. They can be secured permanently on the inside of your home for added protection.
Most window latches are available with different types of attachments, usually screws that you can attach to the back side of your windows so you can use them with a variety of window frames. Also, the biggest advantage of window latches is that they are very easy to install and very easy for anyone to use.
There are three common types of window latches sold by various manufacturers: single-sided tilt, dual-sided tilt, and double-sided tilt.
How Do You Install Window Screen Latches?
Window screen latches are a great way to keep your windows locked and secure. They’re easy to install and can be a lifesaver in the event of a burglary. Screen latches are a great way to keep your windows closed in inclement weather.
Here are some tips on how to install window screen latches:
1. Verify that the window is fit for screen latches.
Some windows are not fit for screen latches because of their design. For example, a window that opens inward cannot have screen latches installed. Also, make sure that the window is not permanently closed or has a good-sized channel on the inside where the latch can fit.
2. Remove the window screen.
This can be done with a screen removal tool or a screwdriver. Use a screwdriver to remove the screen and screw around the window frame. Attach the screen to the latch’s channel with a one-inch-by-two-inch wood screw. This screw is used to attach the latch to the channel.
3. Install the screen latches.
These can be installed with a screwdriver or a hammer. A screwdriver should be used to tighten the screen latches.
4. Attach the screen latches to the window frame.
This can be done with screws, nails, or a staple gun. Attach the latches to the window frame using one of these methods.
5. Re-install the window screen.
This can be done with a screen installation tool or a screwdriver. Use a screwdriver to install the window screen and tighten it with a screwdriver.
6. Test the screen latches.
This can be done by closing the windows and checking to see if they stay closed. If the latch is not secure, then repeat all steps above until the latch is secure.
7. Enjoy your new screen latches.
