How Do You Fix Peeling Epoxy Floors?

How Do You Fix Peeling Epoxy Floors?

How Do You Fix Peeling Epoxy Floors?

Peeling epoxy floors can be caused by a few different factors. One of the most common causes of peeling on an epoxy floor is improper installation. If the epoxy compound is not applied correctly and leveled properly, it will start peeling.

 If your objective is to make the floors look brand-new, you will need to remove the existing peeling or lifting coating.

One method of doing this is using a methylene chloride paint stripper to soften the existing finish, followed by a 3-inch scraper or scrape away. Methylene chloride is a type of paint stripper that can be used to remove an old finish from a floor.

This chemical will work to soften the existing finish so that it can be scraped away. To use this method, you will need to apply the stripper to the floor and let it sit for some time. Once the stripper has had a chance to work, you can use a scraper or scrape away to remove the finish.

You should use a 3-inch scraper or a paint scraper to remove as much of the old finish as possible. Once you have removed the old finish, you can apply a new coat of epoxy to the floor and allow it to dry for several days.

Can You Paint Epoxy Floors?

You can paint an epoxy floor with a special paint made for use on epoxy. However, this will depend on what your intended purpose for the floor is. If you are painting your epoxy floor to change its color, the first step to painting over epoxy floors is to create enough grit over the surface, so the new layer has something to grip.

To do this, use an orbital or pole sander with 120-grit sandpaper to roughen the floor. Stop once the epoxy coating appears deglossed but not removed. This will provide the necessary surface for the new paint to grip onto.

You will need to apply several coats of the paint, allowing each layer to dry completely before applying the next one. Depending on the paint brand, you may need to use a special mix of paint and primer.

Related Posts

error: Content is protected !!