How Do You Stain Concrete Countertops Black?

How Do You Stain Concrete Countertops Black?

How Do You Stain Concrete Countertops Black?

Concrete countertops can be stained black with a variety of different products and methods. Here is how you can stain concrete countertops black;

  • Use masking tape and plastic sheeting to mask off areas around the countertop. Cover all of your cabinets, the walls, and the sink. To prevent colourant seepage, press the tape down firmly.
  • Scrub the surface with a solution of 1 cup bleach to 1 gallon of water to eliminate any mold, mildew, or fungus that has grown on it. Allow the concrete to cure fully.
  • Strip the concrete with a concrete stripper that has been mixed according to the manufacturer’s instructions.

Allow the stripper to sit on the concrete for 5 to 10 minutes before scraping away the sealant residue. Rep the peeling procedure until no remnants of the previous sealant remain.

  • Sand the concrete surface using 120-grit sandpaper. You may sand it by hand or with an orbital sander.

The sandpaper will soon wear down throughout this operation, so replace it frequently. Clear the debris using a vacuum.

  • Disperse any isolated pigments by mixing the solution according to the manufacturer’s recommendations.

Fill the sprayer with the colourant. Add No. 80 or higher coarse white aluminum oxide to the mixture for a slip-resistant tabletop surface.

  • Using long, even strokes, spray the colourant over the countertop until the entire surface is coated. The colourant will dry in around two hours. Then, if you want a darker hue, apply a second layer.
  • Allow the countertop to cure for another two hours. If your countertop is still not black enough, apply another layer of colourant and let it set for another two hours.

Once you’ve completed applying stain coats, remove the plastic sheeting. Cure the stain for 24 hours and utilize the surface as little as possible during that period.

  • Apply a food-safe, topical sealer to the countertop, such as acrylic or urethane concrete sealers. Mix and apply them as directed by the manufacturer, then wait 24 hours before using the countertop.

How Much Does It Cost To Stain A Concrete Pool Deck?

The average cost per square foot for a stained Concrete Pool Deck is $7.75 to $10.55. A few factors will affect the cost of staining your concrete pool deck. The first is the size of the deck. The larger the deck, the more material you will need and the more labour it will require.

The second factor is the type of stain you choose. There are a variety of stains on the market, and each has its price point. The third factor is the condition of your deck.

If your deck is in good condition, it will be easier to stain and require less labour. If it is in poor condition, it will be more difficult to stain and require more labour.

The last factor is the influence of the weather on your project. If it rains or snows, you will need to wait for another day. All of these factors will affect how much it costs to stain a concrete pool deck.

Related Posts

error: Content is protected !!