How Do You Weaken A Concrete Wall?
How Do You Weaken A Concrete Wall?
One of the oldest demolition concepts applies when it comes to tearing down a concrete wall: a lot of force causes things to crumble. While power tools have supplanted the traditional sledgehammer approach, the basics remain the same.
If you’re considering demolishing a concrete wall, there are a few things you need to know first. Concrete is a very strong material, but you can break it down with enough force and holes drilled into it.
With holes being drilled, the impact of a sledgehammer allows for fractured concrete material to go into those holes, further weakening the total structure and, more importantly, allowing numerous secondary fractures to form from a single blow of a sledgehammer that would otherwise not occur.
How Thick Is The Stucco On The Concrete Walls?
Conventional stucco over masonry surfaces may be applied with two or three coats. Two-coat systems over masonry consist of: first coat = 3/8 inch thick and finish coat = 1/8 inch thick, or overcast concrete consists of first coat = 1/4 inch thick and finish coat = 1/8 inch thick.
However, it’s important to remember that the thickness of the stucco coat is not the only factor that affects the longevity of the coating. The type of stucco and the condition of the surface also play a role.
For example, stucco over masonry in good condition will not need as many coats of stucco as stucco over masonry in poor condition. Furthermore, if the surface is well-sealed, only one coat of stucco will be necessary.
Thus, it is important to consult with a qualified stucco contractor to determine the best coat of stucco for your specific situation.
How Thick Should A Concrete Pond Wall Be?
If you want to build a pond, you’ll need to determine the dimensions and the type of pond you want to create.
Once you have those dimensions, you’ll need to find a large enough site to accommodate the pond and the forms you’ll need to hold the concrete while it dries and cures.
The concrete should be 4 to 6 inches thick, and once the dimensions are established and an outline laid out, dig out the soil for the entire pond. Forms must be built in place to hold the concrete while it dries and cures.
Once the concrete is in place, you’ll need to add a layer of gravel or crushed stone on top to create a smooth surface. You can then add water and watch your beautiful pond come to life!
