How Long Does Concrete Stain Last Outside?

How Long Does Concrete Stain Last Outside?

How Long Does Concrete Stain Last Outside?

Depending on a variety of conditions, acid stains can last anywhere from 5 to 20 years. The lifespan of concrete stain depends on a number of factors, including the type of stain, the weather conditions, and how often the concrete is cleaned. 

Concrete staining is a popular way to enhance the look of concrete surfaces. It can be used to create a variety of looks, from a natural stone look to a more modern, sleek look.

Stains have a strong and long-lasting color because they permeate the concrete surface. When placed on properly prepared concrete, the color will not fade, chip, or peel away.

Acid and water-based stains and plain and integrally colored concrete can be used on both new and ancient concrete.

They may be used indoors and outside, from concrete floors and kitchen worktops to pool decks and roads. So, depending on a variety of conditions, acid stains can last anywhere from 5 to 20 years.

Do You Have To Seal Water-Based Concrete Stain?

When it comes to water-based concrete stains, there are a few things you need to keep in mind in terms of sealing. First and foremost, it is essential to note that these types of stains are more prone to fading and chipping than their oil-based counterparts.

As such, it is generally recommended that you seal them in order to protect the finish. You can use a few different sealers, but water-based acrylic sealers are typically the best option.

Water-based stains, in other words, work by pouring into the concrete pores and combining with the cement, but they do not chemically affect the concrete itself.

This implies that, by definition, they are not permanent – if not sealed, they will wear away.

How Do You Acid-Stain Concrete With Multiple Colors?

The two most common methods for applying multiple colors of acid stains are “wet on wet” and “wet or dry.” Both approaches offer striking color effects that may elevate a basic stain job.

The wet-on-wet approach involves applying one color on top of another while both are still wet. This technique produces a softer edge where two (or more) stain colors meet.

The lighter color is usually put first, followed by the darker one, sprayed or brushed in and around the first color.

Be careful that the darker acid stain will overshadow the lighter equivalent, thus, when mixing dark into light, less is more.

When using the wet-on-dry approach, the applicator waits for the first stain to dry fully (usually at least 5 hours) before adding the second color.

Where the two colors meet, this procedure creates clearer, hard edges. Typically, the lighter stain colors are put first, and care is taken not to stain the entire floor but rather random areas. While overlaying the lighter base color, the second color fills in the vacant spaces.

Darker stain colors, like wet-on-wet staining, will overshadow lighter hues. A small amount goes a long way.

Before beginning any acid stain project, apply a sample on the real floor to guarantee suitable color and aesthetics.


Related Posts

error: Content is protected !!