How Much Does Concrete Edging Cost Per Linear Foot?

How Much Does Concrete Edging Cost Per Linear Foot?

Poured concrete edging typically costs $4 to $5 per square foot in materials, plus $5 to $13 per square foot in labor and installation.

Concrete edging costs can vary depending on a number of factors, but typically run between $9 and $18 per linear foot for materials and installation.

Some of the factors that can impact the cost of concrete edging include the size and scope of the project, the type of concrete used, the geographical location, and the company performing the work.

In most cases, concrete edging is priced by the linear foot, so the larger the project, the higher the overall cost will be.

One factor that affects the cost of concrete edging is the size and shape of the edging. Generally, the more complex the shape, the more expensive the edging will be to produce. Additionally, the type of concrete used will also affect the price.

For example, rebar-reinforced concrete edging will be more expensive than regular concrete edging because of the additional costs associated with reinforcing the edging.

What Type Of Concrete Is Used For Edging?

QUIKRETE® Crack Resistant Concrete is the ideal product for the job, and for a personal touch, you can add one of five QUIKRETE® Liquid Cement Colours to the mix.

Concrete borders are versatile and can be designed and built to match any landscape contour.

Fiber-reinforced QUIKRETE® Crack Resistant Concrete is the perfect material for the job because it’s strong, durable, and has a personal touch with its five different coloured options.

So if you’re looking for a concrete border that’s both strong and beautiful, look no further than fiber-reinforced, crack-resistant concrete.

How Do You Do Concrete Edging Yourself?

Poured concrete, on the other hand, is a substance that some people avoid. Poured concrete is commonly replaced with bricks or pavers because it is thought to be excessively complex to install.

However, pouring concrete or cement is not significantly more difficult than using bricks or pavers. It’s only a little modified procedure that yields clean, smooth edging.

Preparation And Planning

The first step in making a poured concrete border is determining where to install concrete edging.

It provides you with a project map. If the border is straight, mark it with stakes in the ground and run string between the stakes to construct the border’s outline.

A garden hose, for example, can be used to trace the shape of a curving border.

Make an outline of the inside and outside edges of the future concrete border, making sure that the width between those edges is consistent across the border.

After spray painting the inner and outer edges of the outline, pull the stakes, garden hose, or other objects out of the way.

Dig A Trench Parallel To Your Guide.

The trench for the poured concrete edging is a critical phase. The trench’s sides must be level to prevent the flexing of the concrete form, and the trench must be 6 inches deep to accommodate a layer of gravel as well as a portion of the concrete.

Following the spray-painted contour, dig out the trench with a flat-edged shovel, keeping the trench’s sides smooth.

Creating The Forms

A 3-inch-deep layer of gravel at the trench’s bottom is required to assist drain water from the concrete edging. Water may cause extensive damage to concrete over time, cracking it during cold weather.

By preventing the concrete from absorbing water, keeping water away from the base of the concrete edging decreases the potential for freezing damage.

On top of the gravel base of the trench, a form for the concrete must be erected. To build the shape, use 6-inch-wide wood boards that can be bent in curves.

The shape will be created by exposing a section of each board above ground. Tap wood stakes into the ground every 2 feet behind the boards along the outside line of the trench to keep the form upright until the concrete is in place, then screw the stakes to the concrete form.

Because the boards must not bow due to the weight of the concrete, all spaces between the boards and the trench wall must be filled with soil.

Wedging sections of 2-by-4-inch wood boards between the outside wall and posts set 1 foot in the rear of the form, add brace support to the form’s exterior wall every 4 feet.

Border Pouring

Once the edge form has been constructed and secured, the concrete or cement mix may be made. Follow the directions on the bag of mix to make a mixture with the consistency of a milkshake.

A wheelbarrow will come in helpful during the procedure; mix the batches of concrete in the wheelbarrow and move the batches to the form using the wheelbarrow. Smooth the wet concrete using a trowel after it has been poured into the form and is level with the form’s top.

Allow the concrete to cure until water begins to pool on its top surface, then smooth it with a float.

Before the form can be removed, the edging must cure for many days. The dirt may then be put along the sides of the edging.