How Much Does Driveway Sealcoating Cost Per Square Foot | Driveway Sealcoating Benefits

How Much Does Driveway Sealcoating Cost Per Square Foot | Driveway Sealcoating Benefits

How Much Does Driveway Sealcoating Cost Per Square Foot | Types of Asphalt Sealcoating Products | Seal Coating Process

Driveway Sealcoating

What Is Sealcoating A Driveway?

Driveway sealcoating is s the process of applying a protective, high-gloss finish to your concrete or asphalt surface. It helps resist stains and provides a more appealing look for your driveway.

It is process in which the top layer of your asphalt driveway is chemically treated with an oil-based or water-based protective coating to reduce wear and tear on the surface, as well as providing protection against environmental damage.

The treatment also helps keep weeds from growing through cracks in the surface. Driveway sealcoating can be applied at any time during the year; however, we recommend applying this service before winter arrives because it will last up to 3x longer than if it was done after winter has set in.

The cost for driveway sealcoating varies depending on square footage and type of coating being applied, but typically ranges between $200-$400 per application. For more information about what driveway seal

Is Sealcoating Your Driveway Worth It?

Sealcoating helps prolong the life of a driveway and should be a regular part of home maintenance. If you seal-coat a driveway or a highway, the surface will last longer. It is recommend doing it about every three years on a driveway.

Sealcoating protects and prolongs the life expectancy of asphalt pavement by filling surface damage and providing a protective layer to keep out damaging UV rays, vehicle fluids, and water.

A properly maintained and sealed asphalt surface has an extended lifetime and reduces long-term repair costs.

How Much Does Driveway Sealcoating Cost? (Sealcoating Price Per Square Foot)

The average cost of materials and labor to sealcoat asphalt in the United States is between $0.15 and $030 per square foot. Sealing a normal 480 square foot driveway will cost between $76 and $120. Sealcoating a bigger 1,000 square foot driveway normally costs between $160 and $250.

Driveway Sealcoating Benefits

The term “sealcoat” or “pavement sealer” refers to a coating applied to asphalt-based pavements. When left uncovered, the top of the asphalt pavement is said to oxidize and degrade.

The sealcoat protects the asphalt from wear, freezing, and car leaks. Sealcoat is promoted as a protective coating for asphalt surfaces that extends their life.

Sealcoating may also be used to reduce the friction or anti-skid qualities of exposed particles in asphalt.

Advantages Of Sealcoating Asphalt

Several advantages of sealcoating asphalt include the following:

  1. Reduces the cost of long-term repair
  2. Accelerates the melting of snow and ice on the surface of the pavement Protects the pavement from oxidation, oil and chemical spills
  3. Water penetration, rain, frost, and snow damage are all prevented.
  4. Enhances the aesthetics of your structure and landscape
  5. Prolongs the life of the pavement, protecting your investment

Types of Asphalt Sealcoating Products

There are primarily five types of pavement sealers. These are commonly known as:

  • Refined tar-based (coal tar based)
  • Asphalt-based
  • Acrylic
  • Fast Dry
  • Oil based

Seal Coating Process

Before Seal Coating, the surface must be totally clean and dry, which can be done through sweeping and/or blowing. If the surface is not clean and dry, adhesion will be compromised.

Sealants are applied to pavements using either pressure spray equipment, self-propelled squeegee machines, or by hand with a brush.

Continuous agitation of the equipment is required to preserve the consistency of the sealcoat mix.

Typically, the process involves two coats and requires 24 to 48 hours for curing before vehicles may be permitted back on the surface.

After adequately preparing the surface, a properly mixed sealer will be applied at a rate of approximately 1.5 square meters per liter (60 square feet per US gal; 72 square feet each Imp gal) per coat.

Does Sealcoating fill cracks

Sealcoating is not a crack filler for asphalt; it is used to seal the surface and preserve it from the elements such as UV rays, salts, and oils. It is not adequate to fill a crack without re-cracking, and it lacks the adhesive properties of Asphalt Crack Filler.

How Often Should You Sealcoat Your Driveway?

Because of their durability and lifespan, concrete driveways are the most popular choice for homeowners. It is advisable to reseal concrete frequently, as doing so year after year might result in hairline cracks and pealing. Concrete driveways should be sealed every four to five years to prevent water infiltration and lengthen their life.

When cracks appear, see a concrete professional to determine whether they require sealing or if there are deeper foundational problems.

Asphalt driveways often require resealing every three to five years. The optimal time of year to reseal depends on the season and requires ideal weather conditions for flawless outcomes.

Many experts advocate sealing your driveway during non-humid, warm, and dry circumstances. Always check the forecast to ensure that two or three days of dry weather are available for project days and drying days.

How Long After Sealing Concrete Driveway Can You Drive on It

The most of specialists advise waiting 24 hours before driving or parking on the driveway, and 30 days before parking large cars or machinery on it. Once the sealant has dried, there are a few easy actions that should be followed to preserve the driveway’s lifespan and upkeep.

Rain 12 Hours After Sealing Driveway

Typically, 12 hours after application, driveway sealer will be impermeable to rain. After 12 hours, if you apply your sealer in proper conditions, your sealer will have set sufficiently to withstand rain.

To get the best conditions for sealing your driveway, ensure that it is completely dry prior to sealing. To encourage effective drying, the temperature must be greater than 50°F (10°C).

Low temperatures retard the drying of sealants or completely prevent them from drying. Allow 30–60 days after new asphalt is put before sealing.

Otherwise, oils in the asphalt may obstruct the sealant from properly curing.

Will Rain Ruin a Freshly Sealed Driveway?

Yes, rain can wash the sealer off if it rains right after it put on. Normally it is recommended to allow at least 24 hours before any rain but we use additives that can allow us to speed up the curing process.

Many sealers are water based and should not be applied if rain is in the forecast

Can You Seal a Wet Driveway?

Driveway sealer cannot stick to wet surfaces, so your drive must not be wet 24 hours before sealing. Make sure your lawn sprinklers are turned off and do not have your lawn treated within one week prior to sealing.

How To Fill Cracks in Asphalt

Filling Asphalt Cracks in the surface of your asphalt driveway or parking lot is essential to increasing the life of your asphalt surface.

The primary reasons you should maintain and repair cracks are to prevent moisture from penetrating beneath the asphalt surface and creating additional damage to your driveway or parking lot.

The second reason you should fill asphalt cracks is to prevent plants from developing in them.

As the roots of vegetation grow in size, they can actually push the pavement up, causing additional harm. This damages the pavement surface and causes additional difficulties.

Even worse, if water does infiltrate the crack and seeps beneath the asphalt surface, it nearly always results in the formation of a soft patch, which can eventually result in the formation of a Pot Hole.

Again, if you live in an area where the groundwater freezes, the liquid beneath the asphalt surface will freeze and force the pavement upward.

All of these problems are usually avoidable with proper care and timely filling of these cracks.

Filling Asphalt Cracks is a simple task, and certainly not more difficult than yard or garden maintenance.

There are several types of cracks to identify; some may be filled by the homeowner, while others may require the expertise of a professional.

A minor crack can be easily repaired. These cracks develop over time as the earth settles and the asphalt deteriorates.

These types of cracks are typically straight or zigzag across the parking lot or driveway surface, and the time has come to patch them with asphalt crack filler.

On the other hand, if you have portions of your pavement that resemble Alligator Skin, which is defined by any tiny fractures that look like wire mesh, you will almost certainly require professional help or be willing to do some significant work.

Asphalt Crack Repair Cost Per Square Foot

To repair a small crack, the majority of experts charge between $1 and $3 per linear foot. However, you should expect to pay between $2 and $4 per square foot to repair a pothole. The cost of repairing asphalt cracks and potholes is determined by the extent of the damage.

Other factors that affect the overall cost of crack filling including:

  • Size of project (linear feet of cracks to fill)
  • Severity of the cracking (large or small cracks)
  • Surface preparation (Blowing out cracks or using mechanical router or brush)
  • Type of crack filler used (cold applied or hot applied)
  • Geographic location of the project

 

Related Posts

error: Content is protected !!
0

Compare