6 Ways on How To Make Your Laminate Floors Less Slippery | Why Is My Laminate Floor Slippery

6 Ways on How To Make Your Laminate Floors Less Slippery | Why Is My Laminate Floor Slippery

Why Is My Laminate Floor Slippery? | How To Make Your Laminate Floors Less Slippery | How to Select, Install & Maintain the Laminate Floor

The floor of your home should be a place for you to feel safe, comfortable, and secure. But what can make you feel unsafe and uncomfortable is a slippery floor.

There are many different reasons why a laminate floor is slippery. Some of the most common reasons are weather conditions, improper installation and the age of the floor.

If anything was spilled on the floor and the next day it is still on the floor, this can create a slip and fall hazard. Laminate floors will be slippery if there’s a buildup of dust, oil spills and dirt, that’s sitting on top of the floor.

The other reason is because the top coat of varnish has worn off, and there are many different types of flooring that require a top-coat to protect them.

How To Make Your Laminate Floors Less Slippery

Laminate floors are a popular choice for many people because they are inexpensive and durable.

However, there is one downside to having a laminate floor: they can be very slippery.

Here is how you can make your laminated floor less slippery to prevent accidents.

1. Keep Your Laminate Floors Clean

First, you should vacuum the surface of the floor often so that it has less dust and dirt on it. You may want to consider investing in an industrial vacuum cleaner if you have lots of surfaces to clean.

2. Avoid Using Carpet Padding

If you put pads underneath your laminate floors, the pads can make the floor a little too soft. If your floors are soft, then they may have a tendency to warp or crack.

In addition, you can purchase floor protection pads that will protect the surface of your laminate floors without adding cushioning to them. These pads have a plastic underside that makes walking on the floor easier.

3. Use an Anti-Slip Spray for Laminate Floors

You can purchase an anti-slip spray that you will use to protect your laminate floors from becoming too slippery. This spray can be applied to the floors and then buffed off using a microfiber cloth.

4. Cover Your Laminate Floors with Floor Protecting Pads

Similar to the previous tip, you can purchase floor protection pads that have plastic bottoms to prevent your floor from warping.

The problem is that these bottom protectors are not as durable as protective pads with cushioning layers underneath them.

5. Put on Ideal Footwear

When you are walking on your laminate floor, make sure that you are wearing footwear that offers traction and traction control. If you wear barefoot, then your feet will slip and slide on the floor.

6. Use Rugs, Runners and Doormats

If you have carpets and runners in your home, then placing rugs and runners over the laminate floors can help you protect them from getting damaged. Likewise, if you have doormats on your laminate floors, then you can use them to prevent accidents.

Slippery laminate floors can be very annoying, especially when they make it difficult for you to walk on them.

By following these tips, you will be able to prevent slippery floors and keep your house dry and clean all the time.

How to Select, Install & Maintain the Laminate Floor

You probably have many reasons for considering having a laminate floor. It can be a great way to get the perfect look you envisioned, it’s easier than stripping and refinishing an old hardwood, and it’s more affordable than carpeting.

Laminate floors when installed can last for between 10-25 years, and the only thing you can do after that is refinish them, or throw them away.

That’s why it’s always a good idea to consider your options when the time comes to install a new piece of flooring.

There are many different types of laminate flooring, and some of them are more difficult to install than others.

Here are some tips to help make sure you do it right the first time.

1. Know the Flooring Material

First things first, take some time to check out your flooring material. The information you’ll need to know before starting the installation process will include: what type of flooring is an underlayment that’s laminate product or surface that’s standard-sized or planks that are cut in half to make more efficient use of space.

2. Check for Nails

A laminate flooring contractor should help you identify potential problems with the floor’s condition before laying the new floor.

If the previous owner installed it incorrectly, or if there are nails in place for a previous installation, they could cause damage when you try to get the new floor in place.

For example, a nail may cause a separation between pieces of laminate that makes it impossible to hold them together.

This can slow down your installation time or make some pieces impossible to install at all. You may have to lay down extra screws or glue to secure the pieces correctly.

3. Check for Damage

The underside of your flooring project should be free of damage before laying in the new product. Look in different areas, especially around the backs of the pieces and along the edges, where damage is more likely to occur.

To save time and money, you may wish to use a level, a line level or laser level, or even tape as guides when installing laminate flooring around sharp corners and interior corners.

4. Use a Skill Saw

Don’t lift up the flooring you’re working with to cut it – particularly if you’re installing a laminate floor in a bathroom or kitchen.

Laminate can be easily damaged by water, and it can swell up if you lay it down and then forget to remove some of the moisture later on.

Instead, use a skill saw to make any cuts from the top of the area that’s going to be covered by laminate.

5. Don’t Leave Extra Edges

When you reach the end of a row and want to finish off the edge in the next row, cut your pieces so that they will overlap on the other side of the floor.

You don’t want to be careful about fitting everything in only to find that once you get your laminate flooring laid down, there’s a big gap between it and your wall designed for an opening or in your closet on either side of an opening.

6. Expect a Bevel

When planning where to put your laminate flooring, you should have some idea of the direction of your wall and how the room is shaped.

If not, you may be making an unnecessary cut at the edge when laying the floor.

When doing this, it’s important to make sure that the edges don’t have sharp angles so that you don’t suffer a trip hazard once you get into the room and walk around on it.

7. Lay the Edges

When laying in your laminate flooring, don’t just lay a piece flat into the floor. Instead, press down gently on the edges of your flooring so that they’re flush with the surrounding area.

This could cause damage to surrounding surfaces or result in excessive movement that you may not be able to fix later.

8. Use the Right Tools

If you’re using a power saw to cut the pieces for your laminate floor, make sure to use a guide so that you won’t disturb the surrounding surface or damage the properties of your flooring.

For example, if you’re cutting into an area where there’s wood flooring underneath, it’s a good idea to place shims behind your laminate piece as you cut.

The shims will allow you to cut more easily without having to worry about wrecking your floor.

9. Don’t Forget the Edges

Another thing to watch out for when laying a laminate floor is the edges of the room. You want to keep track of where the edge and corners are to avoid damaging any surrounding area

. For example, if you’re cutting an outlet cover, you may need to move this to fit your new floor in place. Be sure not to cut too close to this area – move it instead.

10. Go Slowly

It’s important not rush through your laminate flooring installation process when using power tools. Then again, if you’re planning to work alone and have limited time, rushing might be the best option.

A laminate floor contractor will do the work faster and better than you could on your own, and you’ll probably get a better result at a much lower cost.

11. Measure Twice

You shouldn’t cut flooring based on memory alone – instead make a sketch of where the flooring goes before you start.

You can also use the lines on a piece of paper to help you keep your work area neat and organized. It may be difficult to add the second piece without damaging the first, so make sure that you’ve planned for this if you need to do this at all.

12. Lay Flat against Walls

If you’re installing laminate flooring at an angle, there’s a good chance that it will roll away from the wall.

To avoid this from happening, place padding against the wall and make sure that you have a spot for the edges to go.

You may end up with a gap between your flooring and a baseboard or the walls of your closet or pantry if you don’t take this into consideration.

Slippery Laminate Floors FAQs

1. Why does my laminate floor get slippery?

There are a number of reasons why your laminated floors will get slippery. First, dirt accumulation and poor cleaning practices can make your floor more slippery and cause more problems in the long term.

Using excessive waters another. When cleaning your laminate floor, avoid using too much water. Water can enter into the spaces between the planks and cause bulging.

Again, when you notice that your floor is slippery after you or somebody else spills something on the floor, you should wipe up the spill and mop it clean with a towel immediately.

2. How do I prevent my laminate floor from being too slippery?

The best way to prevent your laminate floor from becoming slippery is to keep it clean and dry at all times.

Another way to prevent your floor from being slippery is to use anti slip spray. This spray will prevent people from falling when they walk on your laminate floor.

Again, avoid products containing oil as those will not decrease the slickness of the floor.

You should make sure that you keep your floor clean and dry to prevent it from becoming slippery before you try to apply anything else.

3. How do I clean my laminate floors?

If you don’t know how to clean your laminate floor, you should avoid using too much water. Water can enter into the spaces between the planks and cause bulging.

You should also make sure that you wipe up spills immediately so that they don’t become a problem later on.

4. How do I prevent my laminate floors from being slippery?

The best way to prevent your laminate floor from being slippery is to keep it clean and dry at all times. Use a degreasing product in areas that are more susceptible to oil such as kitchen and garage floors.

Use the proper cleaner and polish. The use of the unsuitable detergents may result in the formation of a slick coating on the flooring.

Thoroughly clean the floors. Moisture, wax, grease, soap, talcum powder, and dust residues can all contribute to a slick floor.

After cleaning and polishing, always use a dry mop. Your mops may pick up grease, soap, and moisture. When you re-use the same mop after cleaning it, a coating of grease, soap, and moisture forms.

Invest in appropriate matting for numerous locations of your workspace. Different mats are made for different purposes.

To minimize slips and falls in your company space, ensure that you have matting coverage throughout your establishment.

5. What is the best way to walk on your laminate floors?

If you are walking on your laminate floor, then you should wear footwear that offers traction and traction control. The right footwear will enable you to walk and run smoothly without slipping or sliding.

6. What is the best way to protect my laminate floors?

The best way to protect your laminate floor from getting damaged is by putting floor protection under it.  The floor protection pads have a plastic bottom that protects the floor from warping.

Once you have finished cleaning your laminated floors, you may want to take extra precautions to protect them from getting scratched and damaged.

One of the best ways to protect your floors is by using a laminate flooring mat.

These mats are placed in high traffic areas of your home such as entryways and living places. You can also use them in the kitchen and bathroom areas as well.

When you use laminate flooring mats, you prevent your laminated floors from getting damaged and scratched. The best part is that they are easy to clean and maintain.

7. How to clean a laminate floor

The best way to clean an area on your laminate floor is to use soapy water and a soft cloth to wipe up the dirt. You may have to give the floor a good scrub and rub with a smooth soft brush if there are lots of stains or dirt in your room.

A steam cleaner would also work well, but this is something that you should use sparingly and with caution.

A lot of steam could damage your flooring, so make sure not to leave it in the area for too long and that you take care to remove any moisture from the space afterward.

Related Posts

Compare

Share via
Copy link