What Does Foundation Pads Mean In Construction? Foundation pads are a type of shallow foundation used to support localized single-point loads such as structural columns, groups of columns, or framed structures. They are typically rectangular or circular concrete pads that can be reinforced with steel to reduce the thickness required for the foundation. Foundation pads […]
What Does Manifestation On Glass Mean In Construction? Manifestation on glass in construction refers to the application of a frosted film or other decorative treatment to large expanses of clear glass, such as windows, doors, and partitions. This treatment is used to make the glass visible and prevent injury through collisions. It can also help […]
What Does Screw Piling Mean In Construction? Screw piling is a type of deep foundation used in construction that involves installing steel screw-in piles into the ground. The piles are made of circular hollow steel sections with one or more helices attached to them. During installation, the screw piles cut into the soil following a […]
What Is A Roof Cassette In Building Construction? A roof cassette is a factory-manufactured panel used in building construction, similar to floor cassettes. They are usually made of timber or steel-based structural insulated panels (SIPs) and are used for pitched roofs in residential applications. Roof cassettes span from eaves to ridge and are supplied with […]
What Does Augered Piling In Construction? Auger cast piles are a type of drilled foundation in which the pile is drilled to its final depth in one continuous process using a continuous flight auger. This technique is used in construction to create a concrete deep foundation and involves rotating a hollow stem continuous flight auger […]
What Does Rising Mains Mean In Construction? A rising main is a pressurized pipeline system used in construction to transport sewage from one point to another. It is typically laid in a trench with a minimum of 0.6m of earth cover and should have an even gradient with minimal sharp bends and curves. The diameter […]
What Does Interceptor Piping Mean In Construction? Interceptor piping is a type of pipe that intercepts another drainage pipe or water prior to its final destination. It is typically used in landfill membranes to intercept drainage water that would otherwise sit on the top of the membrane. Interceptors are also used in sewage systems, where […]
What Does H Hinge Mean In Construction? An H hinge is a type of pivoting hinge commonly used in high-end millwork and cabinetry. It is called an H hinge because it looks like the letter “H”. The hinge arm consists of two flat or decorative stock plates that are shaped like long rectangles and are […]
What Does Intumescent Paint Mean In Construction? Intumescent paint is a type of coating used in construction that responds to heat exposure by swelling in a controlled manner. This swelling causes the paint to increase in volume and decrease in density resulting in the formation of a carbonaceous char layer that acts as insulation to […]
What Does Flat Casing Mean In Construction? A flat casing is a simple piece of wood, aluminum, or steel used to cover the interface between an installed component and its surrounding area. It frames (or trims) doors or windows on both the interior and exterior of a structure, with the flat casing being three and […]