Permeable Pavers Installation & Cost | Permeable Paver Types | Permeable Interlocking Pavers

Permeable Pavers Installation & Cost | Permeable Paver Types | Permeable Interlocking Pavers

Permeable Pavers Installation & Cost | Permeable Paver Types | Permeable Interlocking Pavers

Permeable Pavers

What are Permeable Pavers?

Permeable pavers are paving products designed for vehicle and pedestrian pathways that enable the infiltration of precipitation into the surrounding soil.  They are paving stones that allow water to pass through them.

The most common types of permeable pavers are cinder blocks. These are made from a porous type of stone which allows water to seep through it without gathering on the surface.

Some permeable pavers are made from materials such as concrete and asphalt.  Permeable pavers are the solution for environmentally conscious citizens.

Permeable pavers include any type of paving material that allows water to drain through the spaces between the pavers. Permeable pavers are designed to allow water to drain through the spaces between the pavers.

This allows rainwater to filter into the ground, which avoids flooding, wet basements, and basement smells.

The surface areas of water on the surface tend to be smaller with permeable pavers, and the area below them doesn’t get saturated with water.

Some benefits of permeable pavers are:

  • -Preventing flooding, basement smells, and wet basements
  • -Improving stormwater runoff and decreasing pollution
  • -No standing water on surfaces or sidewalks

Permeable pavers are available in a variety of colors, patterns, and sizes. The pavers are also highly geometrically symmetrical so they look beautiful on any type of landscape, whether it’s a quiet country yard or an urban landscape with hard walks and driveways.

The sand used for permeable pavers doesn’t include the petroleum products found in many other types of sand. This is good news environmentally speaking.

The only downside to permeable pavers is that they are expensive. They are often used on multi-million-dollar homes. So, if you’re trying to build a new home, you may need to spend more for the pavers than the cost of your house.

Permeable pavers can be installed quickly and easily. They can be laid in one day by a professional contractor or homeowner with minimal skill and experience.

The professionals who install permeable pavers are experienced in installing both concrete and asphalt surfaces along with their varieties of smaller stones and cobblestone pavers.

Asphalt can be installed in only a day. Contractors also offer full designs for lawns and gardens that are made from permeable pavers which improve drainage and prevent contamination.

These pavers have increased in demand from landscaping companies as customers are becoming more environmentally-conscious and want their landscape to be as environmentally friendly as possible.

Permeable pavers have been used for a long time. One of the first types used was the cinder block. These are made from a porous type of stone that allows water to seep through it.

In just a few days, concrete pavers can be installed. A bigger problem for homeowners is getting rid of the water that is already in their home after it rains. Homeowners can install and use a dehumidifier to remove the moisture from the air.

Asphalt is becoming more popular. It’s a cheaper option than concrete and is much easier to install. These pavers are stronger than cinder blocks. They also look similar to concrete but are not as heavy or bulky.

Permeable paving materials are divided into 4 categories:

  1. Gypsum is used as a base. The water it allows to trickle freely while the stones stay in place.
  2. Plastic, called paver mats, are placed in the rain. The pebbles hold together better than stone.
  3. Cem-Straight, which is derived from concrete and is owned by additional equipment that hold the pavers together outside of their array of stones or use a special mesh to draw moisture away from the surfaces before it reaches them.
  4. Concrete Pavers

There are various types of permeable paving stones. There is a lot of variety in what they look like, how they are installed and the cost associated with permeable pavers. They can be clean and simple or intricate and decorative.

Are Permeable Pavers More Expensive? What is the Cost of Permeable Pavers Per Square Foot?

The cost of permeable pavers is between $4.00 and $6.00 per square foot, with the price somewhat fluctuating according to material availability.

On average, pervious concrete costs between 7% and 16% more than standard concrete

Paving a normal two-car driveway measuring around 600 square feet using porous asphalt costs on average $7,360. Typically, homeowners pay between $5,120 and $9,600. Another form of porous driveway material is permeable pavers, which cost between $6,720 and $7,940.

Porous or permeable paving costs somewhat more than asphalt driveway paving, which costs between $2,870 and $6,360. This is because the components are more expensive than conventional asphalt, and the installation requires additional preparation and planning.

How Long do Permeable Pavers Last?

Permeable pavers have a lifespan of around 20 to 30 years; repaving will likely be necessary every 15 to 25 years if the pavers are exposed to cold weather conditions.

Certain municipalities offer tax incentives to property owners who install permeable pavement systems. This is because of the economic reductions associated with decreased reservoir and storm sewer extension investments.

Fortunately, permeable pavers require minimal maintenance, often consisting of occasional debris collection from joints using a small wet-dry vacuum.

Permeable pavers, in general, are a superior option to typical pavement systems due to their superior runoff control and significant environmental benefits.

How is Permeable Pavers Maintained?

Ongoing maintenance is uncomplicated. Vacuum commercial surfaces once a year, or more frequently if grass or leaves have settled in the joints. For residential applications, use a leaf blower on low to gently clear out joints as needed.

Permeable Pavers Installation: A Solution for Dealing with Heavy Rain

There are a number of options available for dealing with heavy rains, but one of the most effective is installing permeable pavers. Permeable pavers are a type of paving stone that allows rainwater to percolate through the surface and into the ground. T

hey can be installed in any type of outdoor environment including driveways, parking lots, and patios.

For an average household, installing permeable pavers can often be more effective than other methods for dealing with heavy rains.

This is because of the effectiveness of rain water absorption for each individual paver compared to most surfaces. The tighter the paver installation is, the less water will be able to percolate through the surface.

In addition, if each paver is set at the right depth, there will be no water running off the surface of the paver and into a drainage channel

Permeable Paver Installation Process

Before in installing permeable pavers around your residence, the first thing you need to do is a test dig. You need to determine what kind of soil is in and around your home.

This may not only help determine what kind of aggregate you will use in the layers beneath the pavers, but it will also play an important role in the actual design used when installing the pavers.

Once the soil type has been determined, most paver systems are constructed as follows:

  1. Dig to the depth that will be required for all the various layers such as a base, a bedding layer and the actual pavers themselves.
  2. It’s a good idea to level well the very bottom level. This will allow water to seep through to the groundwater table.
  3. Next comes a subbase layer composed of gravel stone. The thickness of the layer will depend on the overall design of the system. Once it is in position, compact it.
  4. Next comes a layer of four to six inches of three-quarter aggregate. Once the layer is in place it needs to be compacted.
  5. Now you lay down a layer of at least two inches of one quarter “clean” stone. Again, compact this layer of stone.
  6. Now comes time to lay out the pavers in whatever design you have decided to use. Make sure they are set and tight, using something like a lug nut as a spacing tool.
  7. At this point, you are most of the way there. Next, you install your border pavers and the curbing blocks.
  8. After that, you’ll spread your aggregate stone between the joints of the pavers.
  9. Your final step is to compact the entire driveway, patio or sidewalk to make sure the fit is tight.


After installation, it’s possible to make paver installations even more effective by adding different types of granular materials into the fill materials.

According to experts, this will help control erosion and prevent water from running off the surface of the paver.

As you can see, installing permeable pavers is a very cost effective and environmentally friendly solution for dealing with heavy rains. It’s a great way to protect your lawn and parking lot area from rain damage while enhancing your property’s curb appeal at the same time.

The kind of permeable pavement system you construct also depends on what you plan to do with the runoff water.

Installing a Permeable Paver Driveway

The Advantages of Permeable Paving Materials

Permeable Paving Minimizes Runoff

Permeable paving is a type of paving that allows water to penetrate through the surface and into the ground. This makes it better for drainage and lessens the accumulation of water on the surface. Permeable pavers are one method for significantly reducing stormwater runoff from driveways, sidewalks, outdoor patios, and other paved hardscapes around the home.

Permeable pavers provide the comfort and durability of a hard surface for vehicle and pedestrian use while allowing rainwater to percolate into the soil rather than run off.

Thus, the usage of permeable pavers can assist in alleviating pressure on local sewer systems, preventing erosion in yards, preventing lawn pesticides and toxins from entering rivers and watersheds, and even replenishing local aquifers.

Paving that is Permeable and Temperature Regulation

Additionally, permeable pavers can play a critical role in minimizing the urban heat island effect in urban settings.

The profusion of paved surfaces in some highly populated urban areas (all too accurately dubbed concrete jungles) results in higher temperatures than in adjacent suburban and rural areas.

Temperatures in cities with populations greater than one million people can be up to 5.4°F higher throughout the day than in neighboring locations.

Permeable pavers that allow for flora to absorb part of that heat rather than reflecting it back into the urban environment.

Permeable Paving Conserves Water

You will not require the installation of a sprinkler to keep your grass green. By using spaced pavers, you can significantly reduce your need on huge amounts of water during the summer heat.

Additionally, permeable pavers maintain the natural water cycle. The natural flow is retained by diverting water away from storm sewage systems and back into the groundwater below.

Permeable Interlocking Pavers

“Permeable Interlocking Pavers” is the term given to a type of paving material that is used for low-water runoff applications such as around water supplies, rain gardens, vegetated roofs, and under decks.

This paving material consists of concrete pavers that have been designed to interlock and also allow small amounts of water to seep through them. This allows the paver to have a permeable surface, and it will reduce the amount of water that flows into the storm sewers or into your home.

The pavers are created by combining aggregates and concrete, and they are then cured. The pavers are self-draining and stable.

No Resealing required

When permeable pavers are used, the requirement for resealing or resurfacing the stones is reduced, and repairs are quite simple. If a single stone cracks or develops a problem, it can be removed and replaced.

Permeable Paver Types

There are two types of permeable pavers available: porous concrete and pervious asphalt.

Porous Concrete,

Porous concrete, sometimes referred to as permeable concrete, porous pavement, and pervious concrete, comes in a variety of shapes, sizes, and designs, ranging from small bricks to enormous stones.

Porous concrete is purpose-built to trap water and allow it to filter through to the ground. It is made of the same elements as normal concrete, except that the fine aggregate is completely removed, resulting in a high void content.

Porous concrete has the advantage of reducing runoff from the site, reducing pollutants carried away, and assisting in the decrease of peak runoff volume.

It is appropriate for regions that receive less traffic, such as residential street parking lanes, emergency access lanes, sidewalks, bike paths, and overflow parking zones.

By regularly maintaining porous concrete surfaces, these permeable pavers can achieve a minimum life expectancy of 20 years. Additionally, porous concrete is available in a variety of hues and can be made entirely of recycled materials.

Pervious Asphalt

Pervious asphalt is a permeable pavement type that features an open graded surface over a stone bed. Water seeps through the asphalt and gradually percolates into the soil.

Contaminants that accumulate on the permeable paver during a storm are washed through the stone bed by the rainwater. They then penetrate the sub-base and undergo natural water purification procedures.

As with porous concrete, pervious asphalt minimizes runoff from a site and the number of pollutants transported off to a storm drain.


Related Posts

error: Content is protected !!