What Can I Use Instead Of Window Putty?
What Can I Use Instead Of Window Putty?
Window putty is a common adhesive used to repair windows. However, there are other options available if you need an adhesive for repairs. One option is dryseal. Dryseal is a modern elastic glazing putty sealant that is recommended for use in sash window renovation as a long-lasting replacement for linseed oil putty. Dryseal is moisture and UV-resistant, making it ideal for sash window repair and especially for south-facing windows.
Dryseal seals glazing putty gaps, expands and absorbs moisture, resists yellowing and cracking, and increases both thermal and sound insulation. It also yields a fresh lead color to the existing window glazing.
Dryseal also works well for double glazing repair, sash sealant, metal framework glazing repair, vinyl wood door glazing repair, metal back door trim repairs, and more. Dryseal can be used for the replacement of single-glazed units on wood windows or for repairing glass units on metal back doors.
It can be used as an adhesive that is placed between the glass pane and the frame after removing the old cladding (also known as a double-glazed aluminum window). It also serves as an alternative to silicon window glaze, which helps to correct any fissures in the glass, as well as leaky seals.
Dryseal is a semi-flexible, elastic type of putty that is recommended for sash window repair and renovation. It holds the glass in place by providing a flexible uniform seal around each pane of glass.
Dryseal seals the glazing putty gap, expands and absorbs moisture, resists yellowing and cracking, and increases both thermal and sound insulation. It also yields a fresh lead color to the existing window glazing. Dryseal is available in two strengths: regular strength and hot melt strength.
If you plan on glazing putty repair and renovation, choose the regular strength. If you are going to re-glaze a wood window frame with a sash, choose the hot melt strength.
How Do You Remove Glazing Putty From Glass?
Hardware recommends using a heat gun. Instead of concentrating on one area at a time, heat the putty evenly. Heat can accumulate, causing the glass to expand, crack, or explode. Once the putty has softened, get to work with your putty knife.
Keep the putty knife at an angle and gently scrape in a back-and-forth motion to remove the material. Wipe the glass down with a damp cloth and allow it to dry before replacing it in your window.
These tips can help you remove glazing putty from glass:
- Use an infrared heat gun: Use an infrared heat gun for removing the glazing putty from your window. For best results, use one that has a focal point that is adjustable so you can direct the heat to wherever you need it most.
- Apply heat evenly to soften the putty: Make sure that you apply heat evenly to soften the putty so that you do not cause any damage to your window or its frame.
- Use a pointed putty knife to remove the putty: If there is any glazing putty left on the window, use a pointed putty knife to carefully scrape it off.
- Wipe the glass down after you remove the glazing putty: After you have removed all of the glazing material, wipe down the surface with a cloth or paper towel. This will help prevent dirt from getting stuck in the glass.
- Give the window a dry and clean look: After you have removed all of the glazing putties, give the window a clean and dry look that preserves it for future use with a layer of caulk around the perimeter or in sash holes.
How Do You Remove Glazing Putty From Wood?
Heat the putty with a heat gun in one hand and a stiff putty knife in the other to soften and gouge it out. Protect your hands from burns by wearing leather gloves. To avoid concentrating heat in one spot, keep the heat gun moving.
To properly remove glazing from wood:
- Use an infrared heat gun: Use an infrared heat gun for removing glazing from wood. For best results, use one that has a focal point that is adjustable so you can direct the heat to wherever you need it most.
- Apply heat evenly to soften the putty: Make sure that you apply heat evenly to soften the putty so that you do not cause any damage to your window or its frame.
- Use a pointed putty knife to remove the putty: If there is any glazing material left on the wood, use a pointed putty knife to carefully scrape it off.
- Wipe down the wood surface after you remove the glazing: After you have removed all of the glazing material, wipe down your wood or vinyl surface with a cloth or paper towel.
- Give the wood or vinyl a clean and dry look: After you have removed all of the glazing putties, give your wood or vinyl a clean and dry look that preserves it for future use with a layer of caulk around the perimeter or in sash holes.
