What Is An Architectural Roof Shingle?

What Is An Architectural Roof Shingle?

What Is An Architectural Roof Shingle?

Architectural roofing shingles are among the best quality roofing products, often known as laminated or dimensional shingles.

They are traditionally made of a thick fiberglass mat foundation and ceramic-coated mineral grains securely embedded in well-polished, water-resistant asphalt.

The final product is then covered with a typical shingle style and color, depending on the style of the house.

What Is An Organic Roof Shingle?

Organic roof shingle is also known as organic roof. It is a composite material made up of recycled materials and cardboard. These shingles are made from recycled paper, corncob fibers, and other natural products.

They are strong, durable, and resistant to mold and mildew. They are also waterproof, which makes them less susceptible to leaks than conventional asphalt shingles. For many years, various roofing manufacturers produced organic shingles.

They are made from an organic mat wet with asphalt to make it waterproof before being top-coated with adhesive asphalt and impregnated with ceramic granules.

How Long Should Roof Shingle Nails Be?

You’ll need 1-inch nails using standard architectural shingles and 3/8-inch thick sheathing. If your local construction requirements require thicker sheathing, use a 1 ¼-inch nail.

A longer nail may be required to penetrate the OSB underneath when putting thicker shingles. This is especially true if the plywood is a lesser grade.

When Should An Asphalt Shingle Roof Be Replaced?

Asphalt shingle roofs are typically replaced every 15-30 years, depending on the material used. Composition shingles have a shorter lifespan of 12-20 years, while wood shingles last 20-25 years.

Asphalt shingles are the most common roofing material, so most homeowners will need to replace their roofs at some point.

Can I Shingle A Low-Slope Roof?

Asphalt shingles are one of the most popular roofing materials for homes and businesses, but they can only be installed on roofs with a pitch of 2:12 or higher.

This is because asphalt shingles need to be installed in a way that allows water to run off them, and on a low-slope roof, the water would just pool on top of the shingles and eventually leak into the building.

So if you have a low-slope roof and you’re looking to install asphalt shingles, you’ll need first to install a layer of felt paper or some other waterproofing material, then install the shingles on top of that.

Related Posts

error: Content is protected !!