What Does Down Payment Mean In Construction? A down payment is a good-faith payment that gets deducted from the overall cost of construction or purchase. It is often made by check or credit card and may or may not be refundable. The amount of the down payment usually falls within the range of 20% to […]
What Does Edge Of Pavement (EP) Mean In Construction? Edge of pavement (EP) is a designation used on site plans to clearly indicate the areas that are the interface of one material and the adjacent pavement surface. This designation is used to identify the extent of the pavement, whether it is concrete, asphalt, gravel or […]
What Does Down Lighting Mean In Construction? Downlighting in construction refers to the use of recessed lights, also known as downlights, which are light fixtures that are installed above the ceiling and shine down into a space. The trim of the downlight is typically flat against the ceiling. The main component of a downlight is […]
What Does Downspout Mean In Construction? A downspout is a pipe attached to the side of a building, through which rainwater flows from the roof into a drain. It is typically vertical and extends down to the ground, where it may be connected to piping that carries the water away from the foundation of the […]
What Does Jamb Depth Mean In Construction? Jamb depth is the measurement of the wall thickness that a door or window unit will be fitting into. This includes any sheetrock, sheathing, siding, trim pieces, and interior trim or casing on the outside of the door. Typical jamb depths for doors are 4-9/16″ or 6-9/16″. For […]
What Is Dentil Molding And Dental Work In Architecture? Dentil molding is a type of architectural ornamentation consisting of small, tooth-shaped blocks used as a repeating pattern in the bedmould of a cornice. It has been used for thousands of years on high-end structures as a purely visual feature. Dentils are usually rectangular in shape […]
What Does Depressed Slab Mean In Construction? In construction, a depressed slab is an area of concrete or other rigid material that has been lowered from the level of surrounding areas into a depression. This allows for the construction of features such as drainage channels, utilities, wiring runs, or even stairways. Depressed slabs can be […]
What Does Deflection Mean In Construction? In structural engineering, deflection is the degree to which a part of a structural element is displaced under a load (because it deforms). Deflection can refer to an angle or a distance and can be caused by different types of loads such as point loads, uniformly distributed loads, wind […]
What Does Defrosting And Defrost Cycle Mean In Construction? The term “defrosting” in construction refers to the process of melting any ice that has accumulated on the cooling coils of refrigerant equipment. This is usually done through a defrost cycle, which is an automated process that turns off the refrigeration cycle and allows any ice […]
What Does Dewatering Mean In Construction? Dewatering is the process of removing surface or groundwater from a particular location. It is commonly used in construction sites to removing groundwater or surface water for the duration of construction. Construction dewatering is a necessary process for all kinds of construction applications. The dewatering process in construction sites […]