Battened and Ledged Doors | Battened and Ledged Doors Dimensions , Uses and Cost

Battened and Ledged Doors | Battened and Ledged Doors Dimensions , Uses and Cost

What Is a Battened and Ledged Door? | Battened and Ledged Doors Uses  | Advantages of Battened and Ledged Doors | Battened and Ledged Doors Dimensions & Cost

If you’re looking for a new door for your home, you might be considering battened and ledged doors. These doors are not too common in the United States and Canada, but they’re very popular elsewhere in Europe.

What Is a Battened and Ledged Door?

Battened and ledged doors are the most basic type of door and have been in use for decades.

Such doors are made up of vertical hardwood battens the length of the door and around 35 mm thick, which are generally tongue and groove jointed.

Typically, three ledges (horizontal members) are supplied, one at each end and one in the middle.

Battened and ledged doors can also be braced or braced and framed for further stiffness and a more aesthetically pleasing look.

Such doors are widely used in toilets, bathtubs, and WCs, as well as in homes where cost is a major issue.

Battens and ledges make it impossible for burglars to slip through the door.

The spaces above and below doors make it possible to lock the door from the inside as well as from the outside.

When you need to open the door for some reason, you can use a locking bar to lift up the two sections of the batten so that you can slip through.

Battened and ledged doors can also be braced or braced and framed for further strength and a nicer look.

Such doors are widely used in toilets, bathtubs, and WCs, as well as in homes where cost is a primary issue.

Battened and Ledged Doors Dimensions

Battens are vertical bonds with grooves that are joined together by horizontal supports known as ledges.

In most cases, three ledges are provided: top, middle, and bottom. T-hinges made of iron are used to secure the door to the frame. General dimensions are:

  • Battens are typically 100-150mm wide and 20-30mm thick.
  • Ledges are typically 100-200mm wide and 25-30mm thick.
  • These battened and ledged doors are ideal for small spaces of averagely 900mm space.-(900 x 2000) to (1000 x2000)

Battened and Ledged Doors Uses

Battened and ledged doors are often found in buildings such as farmhouses and barns because of their durability, attractiveness, and practicality.

However, a new home or old home with battened and ledged doors can be extremely attractive on any lot.

The following are some uses for battened and ledged doors:

  • They can be used as entrance or exterior doors in historically-styled homes.
  • They can fit well into modern styles of home construction.
  • They can be used as closet doors in a home.
  • They can be used to separate one room from another while still allowing light to pass through.
  • They’re a great option for bathrooms and showers because of their ability to stop drafts, keep the area clean, and allow light in.

Advantages of Battened and Ledged Doors

We often associate battens or ledges with old medieval-style castles, but these features have practical functions as well.

They’re better than traditional doors in a number of ways:

  1. They’re more weatherproof. When battens and ledges are used, they can overlap each other to provide the same amount of weatherproofing that a traditional door offers.
  2. They’re stronger. Using a batten or ledge in place of a door can strengthen an entryway or vertical wall. However, reinforced doors aren’t always needed; you can restore your home’s appearance with a retaining wall or concrete walkway instead.
  3. They reduce noise and storm damage from wind. As our climate becomes more severe, having a solution for reducing the effect of storms on our homes is essential. Battens and ledges are useful for keeping a home tight and secure while still letting in light.
  4. They’re popular with most homeowners. Battened and ledged doors can be simply restored to give an older building character or they can be used on modern-style homes as well. Some people even consider them antiques, so they’re especially popular among collectors.
  5. They’re moderately expensive. Battens and ledges cost about half as much per square foot as an average traditional door, and they cost less than other partially-clad doors.
  6. They can be installed very quickly. Batteries are available for new types of battens that make installation a lot easier than with traditional battens, and they are also available for existing battens in constructing custom-scale doors.
  7. They can be repainted. If you’re not satisfied with the color of your battens, you can paint them to match the rest of your house.
  8. They can be used effectively on a range of materials. Battened and ledged doors can be used on a range of materials and in a number of positions. They’re not limited to use as exterior or entrance doors; they can also function as interior doors, closet doors, sliding walls, or inside partitions that separate rooms from each other.

Battened and Ledged Doors FAQs

What is battened door?

It is a  wood door without stiles which is constructed of vertical boards held together by horizontal battens, 2, on the backside. Also called a batten door, ledged door, and unframed door.

Do battened and ledged doors require special tools for installation?

Battened and ledged doors require some special tools for installation, and also recommended to be installed by an expert.

How can you make a battened and ledged door sturdy enough to withstand an earthquake?

You can reinforce a battened and ledged door in several ways: by bracing it with wooden beams or by using lattice construction.

Lattice construction is a way to make the door sturdier and stronger.

Where are battened and ledged doors most popular?

Battened and ledged doors are popular in areas that experience harsh winters. In warm climates, they can be used as patio or storm doors instead of traditional ones.

Replacing your old battened and ledged door with a newer one is also a great idea!

What types of battened and ledged doors are available?

There are several types of battened and ledged doors available for homeowners. Some offer a traditional look, while others can have a more modern design.

How long will it take to install a battened and ledged door?

Installing a new battened and ledged door will probably take at least one day, but you’ll need at least two days to complete the job and allow for drying time in-between applications.

What do battened and ledged doors cost?

The biggest expense in replacing an old battened and ledged door with a new one is labor.

Battened and ledged doors tend to run about $4.25 per square foot in labor costs or about $85 for average-sized doors.

This doesn’t include the cost of supplies, accessories and installation which can run as high as $125 for a large size door on average.

What is a battened and ledged door used for?

Battened and ledged doors are more commonly used for entrances to homes, livestock barns, or sheds.

They are also useful as balcony doors, closet doors, bathroom shower enclosures, or glass sliding walls.

What is a battened and ledged door made of?

Battened and ledged doors are mostly made with wooden planks that overlap each other at the top, bottom, or both ends of the door. These wooden planks come in a variety of designs, but most are made of pine.

Related Posts

Compare

0