What Is An Emergency Exit? An emergency exit is an exit that is used to provide a safe means of escape from a structure or area in the event of an emergency, such as a fire. Emergency exits must open into locations that are either immediately safe or that provide access to a safe area. […]
What Does Down Payment Mean In Construction? A down payment is a good-faith payment that gets deducted from the overall cost of construction or purchase. It is often made by check or credit card and may or may not be refundable. The amount of the down payment usually falls within the range of 20% to […]
What Does Edge Of Pavement (EP) Mean In Construction? Edge of pavement (EP) is a designation used on site plans to clearly indicate the areas that are the interface of one material and the adjacent pavement surface. This designation is used to identify the extent of the pavement, whether it is concrete, asphalt, gravel or […]
What Does Down Lighting Mean In Construction? Downlighting in construction refers to the use of recessed lights, also known as downlights, which are light fixtures that are installed above the ceiling and shine down into a space. The trim of the downlight is typically flat against the ceiling. The main component of a downlight is […]
What Does Downspout Mean In Construction? A downspout is a pipe attached to the side of a building, through which rainwater flows from the roof into a drain. It is typically vertical and extends down to the ground, where it may be connected to piping that carries the water away from the foundation of the […]
What Does Jamb Depth Mean In Construction? Jamb depth is the measurement of the wall thickness that a door or window unit will be fitting into. This includes any sheetrock, sheathing, siding, trim pieces, and interior trim or casing on the outside of the door. Typical jamb depths for doors are 4-9/16″ or 6-9/16″. For […]
