Samsung Microwave SE Error Code | How Do I Fix My Samsung Microwave SE Error?

Samsung Microwave SE Error Code | How Do I Fix My Samsung Microwave SE Error?

Samsung Microwave SE Error Code | How to Fix Samsung Microwave Error Code

Samsung Microwave Error Codes

When you encounter an error code, servicing is almost always required. To begin, it is conceivable that power cycling the microwave will resolve the problem.

Additionally, if you believe moisture may have entered the microwave, this could be creating mistakes as well, so let it to dry.

If you get an error code, the following steps should be taken:

  • Unplug the microwave or toggle the circuit breaker to turn it off.
  • Allow the microwave to dry if it is probable that moisture in the microwave’s electronics is causing the mistake. In any case, 60 seconds isn’t plenty time to wait.
  • Restart the microwave after waiting.

All microwave error codes, regardless of the one you receive, follow this procedure. However, if you’re curious about the meaning of your error code, refer to the following list:

  • Samsung Microwave Error Code C-10, C-11, C-12: Error with Gas/Easy/PH Sensor.
  • Samsung Microwave Error Code C-20, C-21, C-22: Error with Temp Sensor.
  • Samsung Microwave Error Code C-70, C-71, C-72: Error with Steam Sensor.
  • Samsung Microwave Error Code C-A0, C-A1, C-A2: Functional error.
  • Samsung Microwave Error Code C-d0, C-d1, C-d2: Door or Key error.
  • Samsung Microwave Error Code C-F0, C-F1, C-F2: Communication error.
  • Samsung Microwave Error Code E-01 : Open Error
  • Samsung Microwave Error Code E-02 : Cooking Time Setting Over Error (Microwave)
  • Samsung Microwave Error Code E-03 : Cooking Time Setting Over Error (Grill)
  • Samsung Microwave Error Code E-04 : Cooking Time Setting Over Error (Convection)
  • Samsung Microwave Error Code E-05 : Cooking Time Setting Over Error (Combination)
  • Samsung Microwave Error Code E-06 : Swing Heater Error
  • Samsung Microwave Error Code E-11 : Open Gas Sensor Error
  • Samsung Microwave Error Code E-12 : Short Gas Sensor Error
  • Samsung Microwave Error Code E-13 : T1 Max Time Gas Sensor Error
  • Samsung Microwave Error Code E-14: Dry Up / No Load Gas Sensor Error
  • Samsung Microwave Error Code E-21 : Open Temp Sensor Error
  • Samsung Microwave Error Code E-22 : Short Temp Sensor Error
  • Samsung Microwave Error Code E-23: T1 Max Time Error
  • Samsung Microwave Error Code E-24: Over Temperature Error
  • Samsung Microwave Error Code E-25: Micro Cook Abnormal Temperature Error
  • Samsung Microwave Error Code E-26: Temperature Not Over AD Error
  • Samsung Microwave Error Code E-31: Open Gas Sensor Error
  • Samsung Microwave Error Code E-32: Short Gas Sensor Error
  • Samsung Microwave Error Code E-33: Under Weight Error
  • Samsung Microwave Error Code E-34: Over Weight Error
  • Samsung Microwave Error Code E-35: Invalid Weight Error
  • Samsung Microwave Error Code E-36: Door Open Error
  • Samsung Microwave Error Code E-41: Open Easy/PH Sensor Error
  • Samsung Microwave Error Code E-42: Short Easy/PH Sensor Error
  • Samsung Microwave Error Code E-43: T1 Max Time Easy/PH Sensor Error
  • Samsung Microwave Error Code E-44: Dry Up Easy/PH Sensor Error
  • Samsung Microwave Error Code E-45: Cooling Error
  • Samsung Microwave Error Code E-46: Primary Open Error
  • Samsung Microwave Error Code E-47: Door Open Error
  • Samsung Microwave Error Code E-51: Sense Failure
  • Samsung Microwave Error Code E-52: EEPROM Short Error
  • Samsung Microwave Error Code E-53: Read/Write Error
  • Samsung Microwave Error Code E-54: Zero Error
  • Samsung Microwave Error Code E-61: Open Humidity Sensor Error
  • Samsung Microwave Error Code E-62: Short Humidity Sensor Error
  • Samsung Microwave Error Code E-63: T1 Max Time Humidity Sensor Error
  • Samsung Microwave Error Code E-71: Steam Sensor Open Error
  • Samsung Microwave Error Code E-72: Steam Sensor Short Error
  • Samsung Microwave Error Code E-81: Communication Open Error
  • Samsung Microwave Error Code E-82: Communication Short Error
  • Samsung Microwave Error Code E-83: Communication Error
  • Samsung Microwave Error Code E-X1: Additional Open Error
  • Samsung Microwave Error Code E-X2: Additional Short Error
  • Samsung Microwave Error Code -SE-: Key Short Error
  • Samsung Microwave Error Code TE: Touch Communication Error

Samsung Microwave Turns on By Itself

If your microwave continues to operate after you close the door, you may need to clean it, inspect the latch, or double-check that the door is completely closed. However, if your cooktop lamp remains lit, it may simply be moist from recent cooking. Restore normalcy to your life by following this guide.

You need to establish which part of the microwave is turning on by itself

Light comes on after closing the door

  • Clean the door thoroughly. Open the door and wipe with a moist towel. Clean the microwave’s door latch and latch mechanism.
  • Conduct a visual inspection of the latch mechanism. Inspect the microwave’s door latch and latch mechanism for damage. If any component is damaged, please contact our Support Center to arrange for service.
  • Completely close the door. This is normal if this cures the issue and it has only occurred once or twice. This may occur as a result of the way the switches in the door are built. The preceding actions will ensure that the issue does not recur in the future.

Microwave starts by itself with no interaction

A microwave that turns on by itself is a fire hazard. Unplug it and do not use it.

Microwave Vent Fan Turns on Automatically

When excessive heat is generated on the cooktop and the microwave is at risk of being damaged, the vent automatically turns on to protect the microwave.

When this occurs, it is impossible to switch off the vent until the heat has dissipated.

Microwave’s Cooktop Lamp Will Not Turn Off

  • Unplug the microwave and plug it back in. You can also turn off power at the circuit breaker and turn it back on.
  • Give the lamp time to dry. If the lamp is wet from recent cooking, let it dry.

If the lamp functions normally again after drying, service is not required. We recommend that you operate the vent fan in the future to avoid moisture from accumulating on the light.

Vent Fan Is Weak on Samsung Over-The-Range Microwave

The vent fan on your over-the-range microwave is important for removing smoke and steam from the unit. Additionally, it will switch on automatically if the microwave becomes too hot.

However, if the fan strength is insufficient to hold up a napkin, you may feel as though it is not working. Fortunately, there is a simple way to determine this.

Adjust your vent fan to each speed level to determine if it is functioning properly. If you can see that the fan operates differently on each setting and that the noise produced by the fan is normal, then service is not required.

Samsung Microwave is Not Heating or Has Stopped Working

When a microwave does not start or heat up properly, the most typical cause is that it is on Demo mode. On retail showroom floors, this mode is used to demonstrate microwaves without activating their magnetrons.

Additionally, the microwave will not heat if there is insufficient clearance or ventilation. If the microwave turns on but does not heat, it may be necessary to check a few settings and the installation. This is true for both conventional microwave and convection heating.

Note that the results of Sensor Cooking and Auto Cooking may differ. The microwave does not require service as long as the food is becoming warm. In some circumstances, when cooking a modest amount of food, increasing the quantity can increase cooking performance.

How to fix when Samsung Microwave is not heating or has stopped working

Ascertain that the microwave is not set to Demonstration mode.

When a microwave is set on Demo mode, you can utilize all of its capabilities but it will not heat anything. This is due to the magnetron being switched off.

To check for Demo mode, simply choose a cooking time and turn on the microwave. The timer counts down far faster in Demo mode than it does in normal mode.

Turn off your unit if it is on Demo mode. Demo mode is option 6 in the menu for models having an Options or My Settings button, and setting it to 2 disables it. For any other model, refer to the directions in your user manual on how to depart.

If your microwave is counting down more quickly than usual and not heating, but your user manual makes no reference of Demo mode, please visit our Support Center to submit a service request.

Examine the Kitchen Timer function.

Ascertain that the Kitchen Timer was not inadvertently utilized in place of a standard cooking cycle.

Inspect the door.

Ascertain that the door is completely closed. If the microwave door is not entirely closed, it will operate but will not heat. Wipe the microwave’s door and frame with a wet cloth; debris may be preventing the door from closing correctly.

Ascertain that sufficient clearance exists on all sides.

Check the clearance to the microwave’s left, right, above, and behind. The space requirements vary by model and are described in detail in the user handbook.

Without sufficient clearance, the microwave will be unable to vent effectively. It will either not heat up at all or will heat up very slowly.

Microwave Control Panel Does Not Respond

If the microwave is powered on but does not respond to commands or if just a few buttons’ function, clean the control panel and do a power cycle. If the panel remains unresponsive, service is required.

NOTE: If the control panel activates automatically without being touched, for example, if the panel behaves as if the 7 key (or any other key) is always pushed, or if a seven-second cycle begins when you hit Start or OK.

Restore order to the control panel.

The panel may be inactive because it is unable to detect your fingers. Wipe clean the control panel with a moist towel, dry it, and then retest.

Note:  Buttons should not be overly difficult to press. If buttons function properly but only when extreme force is applied, please visit our Support Center to request service.

Certain microwaves come equipped with capacitive touch panels. Ensure that you touch the button on these microwaves with your bare finger. The button may not respond if there is insufficient contact area.

Examine for a control lock.

Certain microwaves include a control lock. When this is activated, the other buttons become inactive.

Additionally, there are instances when certain buttons on the microwave do not respond when other functions are being used.

Consult your user manual for further information about control lock and when the button you’re attempting to use may become inactive.

Reset the microwave if necessary.

To reset the microwave, disconnect it or perform a 60-second power cycle at the circuit breaker.

Samsung Microwave Does Not Turn On or Turns Off By Itself

If your microwave does not turn on or turns off on its own, it may have overheated. When a microwave has been in use for an extended period of time and overheats, simply allow it to cool for 30 minutes before attempting to use it again. Otherwise, inspect the light, the outlet, and the power cord.

The light inside the microwave appears dull due to the tinted door. If the light illuminates when you open the door, it is functioning properly. If the light does not illuminate when the door is opened but the microwave is powered on, replace the light. Always refer to your user manual for advice on how to replace the light.

Examine the outlet.

Check to verify whether the microwave’s circuit breaker has been tripped, and also check to see if another device plugged into the outlet is operating.

Samsung strongly advises against the use of extension cables, GFI outlets, or surge protectors with home appliances.

Conduct an inspection of the microwave’s power cord and connector.

Examine the cord and plug for signs of deterioration (cracks, fraying, chafing). If the circuit breaker trips again while unplugging the microwave, the issue is with the wiring in your home. Make contact with an electrician.

If there is damage to the wiring or if the circuit breaker does not trip when the microwave is unplugged.

Condensation Forms on The Microwave Door

Because the door of your microwave is not entirely sealed, some moisture that collects on the outside may seep inside or between the glass panes. Condensation on the inside is most frequently caused by the meal you’re preparing.

The microwave’s inside

Condensation on the inside of the microwave is natural, especially when cooking foods with a high-water content.

Condensation that occurs between the glass panes is included in this. Condensation will eventually evaporate. Additionally, you can keep the door open to assist the smoke in dissipating more quickly.

External to the microwave

Condensation that forms on the outside of the microwave originates from the outside. This is most frequently encountered with over-the-range microwaves when cooking or boiling water on the cooktop beneath it.

Condensation may also collect inside the microwave, or between the door and the glass. Using lids on your cookware and running the hood vent while cooking will help reduce this type of dampness.

Samsung Microwave SE Error Code

The SE error code that flashes on the display of Samsung microwaves indicates a “Sensor Error.” This indicates that your humidity sensor has shorted out and requires replacement.

You will need to uninstall the entire unit and remove the outer shell to access the sensor that needs to be replaced. It will be mounted somewhere around one of the vents on the cavity of the microwave.

The sensor control panel is one of the microwave oven’s weak areas. At some point, appliances will fail, program selection sensor buttons become inactive or respond just half the time when pressed.

If one or more buttons on the Samsung microwave remain stuck for more than 60 seconds, the system will display the SE error code on the screen.

What does SE mean on my Samsung microwave?

Samsung microwaves that display the dreaded SE or 5E error code now have a fix. The error code means the touch pad is shorted. The touch pad senses a stuck or shorted key.

How Do I Fix My Samsung Microwave SE Error?

When you are unable to turn off the microwave, always leave the door open. The Samsung microwave’s SE error code cannot be reset by powering down for an extended period of time. It will reappear repeatedly, and the control panel membrane issue will remain unresolved.

In fact, the SE error is 5E. Due to the similarity of the writing, users mistake a number for a letter. It indicates the presence of one or more keyboard-related issues.

  • To begin, you must ensure that the control board is not defective. To accomplish this, you must:
  • Unplug the microwave oven from the outlet
  • Wait 1–2 minutes
  • Re-plug the microwave;
  • Turn on the power
  • Start the microwave.

If the SE error code is no longer displayed on the screen, the device is safe to use. If it reappears, you should inspect the sensor unit’s keyboard, wiring, and tracks.

Samsung Microwave Set Clock

Set the time with the Power Level button (ME19R7041F)

How do I set the clock on my Samsung microwave with no clock button?

Some models have included a hidden clock feature that may be accessed exclusively via the Power Level button. After enabling it, you may quickly adjust the microwave’s timer.

According to the Samsung website, your microwave oven includes an integrated clock. When installing your microwave oven for the first time and following a power outage, reset the clock.

When the microwave oven is not in use, the time is displayed.

  1. Press and hold the Power Level button for 3 seconds.
  2. Enter the current time using the number buttons. To set the clock, you must press at least three numbers. For instance, if the time is 5:00 p.m., press 5, 0, 0. 500 will be displayed on the display.
  3. To adjust the power level, press the Power Level button.
  4. Select AM / PM using the Power Level button.
  5. Press the button OK/START.
  6. A colon indicates that the time has been specified.

Set your new countertop microwave’s time (MG11T5018CC)

When you first install your microwave, and whenever there is a power outage, you should set the timer.

  1. To begin setting the time, press OK, followed by the left or right arrows to change the hour. Then, press OK once again.
  2. To set the minute, use the left or right arrows, and then hit OK.
  3. The time is now displayed on the control panel. When you use your microwave, the current time is replaced with the pre-programmed cooking time.

Set the time with the My Settings button (MC17J8000CS)

When you first install your microwave, and whenever there is a power outage, you should set the timer.

  1. To begin setting the time, press OK, followed by the left or right arrows to change the hour. Then, press OK once again.
  2. To set the minute, use the left or right arrows, and then hit OK.
  3. The time is now displayed on the control panel. When you use your microwave, the current time is replaced with the pre-programmed cooking time.

Set the time with the Clock button (Several models)

Note: These instructions are for the microwave models ME18H704SFS, ME16H702SES, and ME20H705MSS.

You won’t have to search for the clock feature on these models, since they come equipped with their own. Simply press it to set the time.

  1. To begin, click the Clock button.
  2. Use the number pad to enter the time.
  3. Select AM or PM by pressing the Clock button once more. Note that on ME16H702SES, this step is optional.
  4. To confirm the time, press ENTER/START.

On certain models, you may view the current time by pressing the Clock button while cooking.

 

Related Posts

Compare

0