What Can I Cover A Concrete Wall With?

What Can I Cover A Concrete Wall With?

What Can I Cover A Concrete Wall With?

The most dependable method of covering concrete walls is to build a timber frame that stands right on top of the concrete. The wood frame can then be utilized as a foundation.

The simplest technique is to place drywall sheets on top of the frame and then paint the drywall to match your style. Barnwood or planks may also cover the framework for a different aesthetic and a bit more labor.

Concrete walls provide a good foundation, but they are not visually appealing. With a little know-how and elbow grease, any homeowner can convert their basement or garage by covering the concrete walls with drywall or barnwood.

How Do You Plaster A Concrete Wall?

Plastering a concrete wall may modify its look, level it, make it more moisture-resistant, and allow you to add texture. It takes time to plaster a concrete wall.

You must prepare the wall and allow for a cure and drying time between plaster applications.

A badly prepared surface may fracture and sag with time, and the plaster will fall off the wall. Old paint, grime, mold, and mildew can cause issues.

Step 1

Construct the concrete wall. It must be completely removed if the wall has been painted and the paint is peeling or flaking. The simplest method is to have the wall sandblasted.

Step 2

If you don’t want to sandblast, install metal lath over the painted concrete wall. Use 7/8-inch concrete screws with washers 12 inches apart to attach the lath to the wall.

Step 3

Caulk any cracks and treat mold and mildew by killing the mold first and then removing any stains. Using a wire brush, clean the mortar joints.

Step 4

When the paint is properly adhered to the wall, use a bonding agent on it. Spray or brush the agent all over the wall. Follow the manufacturer’s recommendations.

Step 5

Apply a slurry, slush, or dash coat to the concrete wall. 1 part Portland cement, 1 to 2 parts masonry sand, and enough water to make a fluid mixture. Cover the entire wall with a dash brush to a thickness of about 1/8 inch.

Allow a day for the slush coat to dry. The terms dash, slush, and slurry all apply to forming a base coat. Use a slurry that is almost liquid in consistency for a very flat finish.

Step 6

Follow the manufacturer’s directions while mixing plaster. Apply a base coat between 1/4 and 3/8-inch thick with a trowel over the dash coat. For a flat wall, smooth out the plaster. For a textured effect, leave the wall rough. Allow the base coat to dry.

Step 7

Apply a second coat of plaster over the first using the same technique and plaster mix.

Can You Use Concrete Blocks For A Retaining Wall?

Yes, concrete blocks are ideal for building walls to hold back the soil after digging into a slope for a pathway, patio, or landscaping project. Block retaining walls are generally the same as freestanding block walls but with a few important differences.

First and foremost, block retaining walls are built with a much higher density than freestanding block walls. This means that they will hold more weight and be more durable.

Also, block retaining walls are typically wider than freestanding block walls, allowing for a more natural appearance.

Block retaining walls are also commonly made with a sloped top. This allows water and soil to flow away from the wall, preventing erosion and preserving the soil beneath the wall.

In addition, block retaining walls are typically installed with standard blocks, which are easy to find and inexpensive to purchase.

Block retaining walls are the perfect option if you are looking for a durable and attractive wall to hold back the soil after you dig into a slope for a pathway, patio, or another landscaping project.

Related Posts

error: Content is protected !!
0

Compare