### How Many Blocks for Simple 3 Bedroom Bungalow House in Kenya

## How Many Blocks for Simple 3 Bedroom Bungalow House in Kenya

On average, you will need **approximately 2,700 machine-cut stones or blocks** to build a standard three-bedroom bungalow in Kenya. This estimate is based on the typical calculations that it takes **around 13 machine-cut stones to cover a square meter of the wall. **

**The wall area of a three-bedroom bungalow is approximately 200-250 square meters. That equates to about 2600 to 3300 blocks. This is after you remove blocks for doors and windows and add 10% for good measure and wastage, **

A three-bedroom bungalow is a simple, one-story house with three bedrooms, one or two bathrooms, a kitchen, dining, and a living room. A three-bedroom bungalow can be made with mud bricks, concrete blocks, or machine stones.

There are many benefits to having a machine cut block home. Firstly, they are more affordable if you live near quarries.

Secondly, they are much quicker and easier to build, which means that you can have your home up and running in no time. Finally, they are much more durable and earthquake-resistant than traditional brick homes.

The cost of the stones will also vary depending on the supplier and the quality of the stone. For a three-bedroom bungalow house, the cost of the blocks stones will be about KES. 94,500 based on KES. 35 per stone X 2700. This may seem like a lot of money, but it is important to remember that the stones will last many years and will not need to be replaced.

The size of a three-bedroom bungalow will depend on the size of the land it is built on. In Kenya, a bungalow that is three bedrooms and has a total floor area of 100 square meters will cost about KES 3.3 million (USD $27,000).

The cost of a three-bedroom bungalow will also depend on the materials used to build it. A mud brick bungalow will cost less to build than a concrete block or stone bungalow. However, a mud brick bungalow will need to be plastered and painted, which will add to the cost.

A three-bedroom bungalow is a good choice for a family who needs a lot of space. It is also a good choice for a family who wants a home that is easy to maintain.

## How Do You Calculate The Number Of Blocks For A 3-Bedroom Bungalow?

*How to Calculate the Number of Blocks for a 3-Bedroom Bungalow*

Building a 3 bedroom bungalow might require a different number of blocks, depending on the size of each block and the number of courses used in the wall.

To calculate the number of blocks needed, divide the area of the wall by the surface area of a block. Alternatively, divide the total area of the walls by the area of a single block.

Here is an example, for a bungalow, a block that is 6 inches wide and 9 inches high would be a good choice.

If **13 blocks is required for 1m2 of wall, therefore (215 SQ ×13) = 2800 blocks is required for 215m2 of wal**l.

Obviously, we will employ the length of the wall without considering openings, so we are going to make use of 76.78M as the total length of the wall. So,

**Length of wall =** 76.78M

**Height of wall =** 2.8M

**Area of wall =** (76.78M × 0.2.8) = 215M2.

Hence, the total number of blocks required to take the building from DPC to the l**intel level to the roof level = 215M2× 13 = 2800 block**s (disregarding openings, damages, and wastage).

Ultimately, the total number of blocks required to complete the** construction of a three-bedroom bungalow house ranges from 2600 to 3300 blocks** (disregarding wastage).

## Get Instant Cost Estimates Below (Calculator)

*How To Use The Construction Cost Calculator*

**Step 1**: Adjust the Plinth Area to the estimated Total Area of your upcoming house. E.g, 2 Bedroom = 60 Square Metres, 3 Bedroom from 80 Square Metres, etc…

**Step 2** : Choose the **Type of Finishing**, **Roofing Type**, and **Flooring Type**. *Approximate project cost *will be indicated below this.

**Step 3**: You can also include contact details and submit

### Instant Calculator