How to use Glue Gun; 4 Simple Steps on How to use Glue Gun.
How to use Glue Gun: Whether you intend to do glue on timber, metal,wood or plastic, a glue gun can be of great use. Below, you will get to know on How to use Glue Gun on your day to day work:
4 Simple Steps on How to use Glue Gun.
Step 1 : Prepare Your Working Area
Always work in a well-lit area free from any obstructions and clutter so that you can see what it is you are doing and won’t be constantly tripping over or working about objects in the way.
Working in a well-Ventilated area is also very important. Under normal operating conditions both cool and hot melt adhesive should not be harmful, but should overheated then toxic vapours can be published.
Also, ensure that Your work surface is level and flat. The service stands that include off the shelf glue guns aren’t that great and can easily topple over if not resting on a flat surface, and you definitely don’t want that happening when it’s turned on as well as temperature.
Step 2:Insert the Glue Stick and Set the Temperature
Now the glue gun is ready, you are ready to add the glue stick. Based on your project, you may need either multipurpose, wood or coloured adhesive. Also, glue guns have different temperature settings. Check if you’ve got the right type of glue stick by speaking to the adhesive stick packaging. And be certain that you never pull a half-used glue stick from the glue gun when it’s still warm, since this may spill hot glue onto your skin or surfaces.
Glue Gun Photo, Source; thesprucecrafts.com
Before you turn it on, first check that there is a glue stick inserted and ready to use. Coloured glue sticks require a lower temperature (105 degrees Celsius) than neutral glue, because then the glue will stay nice and bright
In the case for the gun we are using in this example, the manufacturer states to leave the gun for 5 minutes, but as mentioned, refer to your manufacturer user manual for specific times.
Glue gun plugged in and heating up to temperature. The nozzle will be very hot, so be careful not to lean it against any material or touch it without heat-resistant gloves.
Step 3: Start Glue Application with Glue Gun.
With everything now prepared it is time to apply some glue. Before applying the adhesive directly to any surfaces, it is a good idea to do a test first.
Together with the nozzle pointing downwards, gradually apply pressure to the activate and examine the hot glue onto a piece of scrap cloth, such as cardboard, to see whether it is ready to use. You’ll know when the paste is ready as it turns into liquid and is discharged once you pull the trigger.
Now that you are ready to utilize the Gun, shield any surfaces using a covering such as a cutting mat or, for smaller jobs, a glue pad. Additionally, use the stand of your glue gun to rest it on when you are not working with it. Never put the adhesive gun onto its side since the adhesive could trickle, or the nozzle could create a burn mark.
Whether You’re gluing glass, metal, Plastic, wood or leather, it’s important to have a sterile and grease-free surface as greasy, smooth surfaces don’t bond together.
Step 4: Remove Glue from Your Glue Gun & Allow to Dry
Concerning drying time, you could be asking yourself; How much time does it take hot glue to dry? In answer, allow at least 5 minutes prior to moving anything to guarantee the glue has time to set.
Most glues should have put enough to allow you to move the thing you’re working on, however if it is possible, allow 12 hours for the adhesive to really harden off.
When you’ve finished gluing, always unplug the adhesive gun before cleaning it. To prevent the paste on the nozzle from setting, wipe the glue off immediately with a dry cloth. The nozzle will continue to be warm, so be cautious — always wear heat-resistant gloves. If any extra glue has set in your material and overlaps, you can trim it using a pair of scissors. For strings of glue, briefly heat the glue up with a hair dryer to melt it, and then wipe it away with a cloth.
